Home • Router settings - Page 8

At home, about 40 smart devices were all crammed into the old AC2100's 2.4G, and the speaker vacuum all went offline late at night. I bought a second-hand Xiaomi AX3600 for 95 yuan. Back then, it was a first-generation WiFi 6 flagship that cost 599 yuan, with six cores and 512MB of memory. After switching to an IoT private gateway, it only lasted a month and disconnected to zero. Includes five steps for second-hand machine inspection and a complete setup sequence, clearly explaining who should be accepted and who should not be touched....

The WiFi at home has all gotten slower, and in actual Gigabit tests, it's only a little over 200 Mbps. I almost called 10,000 to request a repair. After a night of thorough investigations, three real culprits were uncovered: the uplink was completely eaten by mobile cloud sync, the 2.4G channel was crowded by a neighbor's newly installed device, and the TV was slow as if it were a slow internet. Attached AX3000T complete inspection sequence, just copy and use it....

The Xiaomi Router 4A is a single device with two devices: the 100Mbps MT7628 single-core with 64MB of memory and a 100Mbps port, while the gigabit version MT7621A dual-core with 128MB and a full gigabit port. Sanshu's 300Mbps broadband is firmly suppressed at 90Mbps by the 100Mbps version. This article explains the differences between the two versions, how to recognize them when you get them, and what they can do for each in 2026....

Both the Xiaomi Router 3 and mini use the old MT7620 platform, and the 100MB port as the main router is no longer sufficient. I pressed five steps to turn the one in the drawer into a Padavan, connected to my mom's home TV as a device-level bypass router to block ads, and stepped into every pitfall for you....

The Xiaomi BE7000 has four ports all 2.5G, plus USB 3.0. The launch price is 799 yuan, now around 500 yuan. 2-gigabit broadband measured 1880 Mbps wired, NAS increased from 110MB/s to 290. But it's not a 10-gigabit router, nor does it have a flashing ecosystem. Who should buy it, who can save money? This article explains everything clearly....

Xiaomi routers don't have factory default passwords, admin is the usual rule for other routers. The one you set yourself in the first boot wizard is the one, and after resetting, it won't revert to the initial value. Forgot password, password box not popping up, or buying second-hand are handled separately, with one form for the problem. ...

After the Redmi AX6000 was discontinued, the second-hand model has actually remained strong. Is it worth it at a 260 yuan price with a quad-core 2.0GHz processor and 512MB of RAM? I helped a colleague get one and tested it at the same spot as my own AX3000T for three days: the same house is nearly 90 Mbps, but two walls are 80 Mbps apart. No 2.5G port and no support for dual WAN—these are major drawbacks. Three types of people should buy it with a closed eye; three types should avoid it....

The Mijia thermometer and humidity meter goes offline at midnight. I want the Xiaomi router, which runs 24/7, to double as a Bluetooth gateway. After checking the 31.1 backend and the Mijia toolbox, I couldn't find it—the original hundred-yuan AX3000T didn't even have this hardware. If you have a Bluetooth gateway, make sure the model has the word 'hub' on the promotional page....

Before selling the Xiaomi router Mesh sub-router as a second-hand tool, you must first unconnect it; otherwise, buyers won't be able to access the backend after getting it, and it will look like a broken machine. I've gone through both deleting nodes and resetting each one. This article covers the status after deletion and the three aftermath matters....

Don't throw away your old Xiaomi router—plug the network cable into the WAN port, switch to the cable relay in the background, and in three steps, convert it into an AP, just send WiFi and use it as a switch. After changing 192.168.31.1, if you can't enter, it's because the management IP drifted, not bricked. The main router device list can be recovered. Includes a list of expired functions and my 2.4G IoT private network usage....