China Telecom router 192.168.2.1 official website entrance
192.168.2.1 login entrance is the IP address used by China Telecom, many telecom broadband users use the telecom router given by China Telecom, some users want to use their mobile phones to log in to the telecom router management background to modify the wireless WiFi password but don't know how to do it, the following is a detailed mobile phone login to the telecom router (default address: 192.168.2.1) Graphic tutorial to change WiFi password.
Necessary preparations:
phone: Make sure your phone is connected to the wireless WiFi signal of your current telecom router, which is a prerequisite for your phone to open the router login management page.
management password: know the router's administrator login password (marked on the nameplate sticker on the back of the router).
Step 1: Connect to WiFi and go to the admin page
Open Settings: Tap "Settings" -> "Wi-Fi" on your phone and make sure you are connected to the WiFi that needs to be changed to the password.
Open the browser: It is recommended to use the browser that comes with the phone (such as Huawei Browser, Xiaomi Browser, Safari Browser, etc.).
Enter the address: In the address bar at the top of your browser, enter 192.168.2.1 and click "Go" or "Enter."
Note: Do not enter this address into the search box of the search engine, but be sure to enter it into the "URL bar" at the top.
Step 2: Log in to the router management background
Afterpage jumps, you will enter the login interface of the telecom router.
Enter your account name and password:
If there is a sticker on the back of the router, it will be marked with the default "Terminal Configuration Account" and "Terminal Configuration Password".
If you've previously changed your admin password, enter the changed password.
many new telecom routers have a default account name: user, and the password is on the sticker on the back of the router.
If you forget the administrator password and the password on the sticker is incorrect, you can long press the "Reset" reset hole on the back of the router to restore the factory settings (be careful as it will clear all configurations).
Step 3: Find your router's WiFi settings
Aftersuccessful login, the interface of different versions of Tianyi Gateway is slightly different, and there are usually the following paths
Method 1 (Simple Interface):
- click on the "My WiFi" icon on the home page.
- go directly to the WiFi settings page.
Method 2 (Classic Interface - Network Menu):
- click on the "Network" option at the bottom or top.
- click on "Wi-Fi Network Configuration" or "Wi-Fi Network Settings" in the left menu bar.
- find the "SSID Name and Password" settings area on the right.
Method 3 (Advanced Interface - "Common Settings"):
- click on "General Settings".
- select "WiFi Settings".
Step 4: Change WiFi password
choose a frequency band: Nowadays, routers mostly support dual-band (2.4G and 5G). If you see two WiFi names (such as ChinaNet-XXX and ChinaNet-XXX-5G), you need to click to modify them separately, and you can set the same password to make it easier to remember.
Locate the Password Box: In the WiFi settings page, locate the input box labeled "Wireless Password," "WPA Pre-Shared Key," or "Passkey."
enter the new password you want to set (it is recommended to set it to a combination of more than 8 digits + numbers, such as www.luyouwang.net, avoid using overly simple 12345678).
Confirm Modifications: Once you're done, click the "OK" or "Save" button at the bottom of the page.
Step 5: Wait for a restart and reconnect
Afterthe router receives the save instruction, it usually takes about 1-2 minutes for the reboot and configuration to take effect.
your phone's WiFi will disconnect (because the password has changed).
wait for about 2 minutes, open your phone's WiFi list and find the WiFi name you just modified.
click on it, enter the new password you just set, and the connection is successful.
FAQs:
Q: I can't open the page when I enter 192.168.2.1?
A: Make sure your phone is connected to the router's WiFi; Check if you accidentally entered 192.168.l.2.1 (the number 1 was mistakenly entered into the letter l); Some new telecom routers may be 192.168.1.1__HTML112_HTML113_, you can try to change this address.
Q: What should I do if I forget my login password (administrator password)?
A: If the password on the sticker is incorrect and you didn't change it yourself, you can try entering the default password on the sticker on the back of the admin or telecomadmin + router. If none of this works, you can only press and hold the Reset hole on the back of the router (when powered on) for more than 10 seconds until the indicator light flashes fully and restarts, and reset it after factory settings.
