Forty devices in the Mijia App were crowded into a pot of porridge. I divided them into groups according to rooms.
Last month, my mother called me and said that the humidifier in the bedroom stopped spraying water and asked me to check it remotely. I opened the Mijia App and swiped through three screens of the device list on the home page before I found the humidifier. There were about forty devices in the house including her account, all piled in a tiled list, and their names were all factory names like "thermometer and hygrometer" and "socket." Putting the two thermometers and hygrometers side by side, I couldn't tell which one was which. It takes two minutes to find a device and thirty seconds to troubleshoot the problem. This is wrong. I spent an afternoon over the weekend dividing this stall into groups according to rooms, and I discovered that the grouping was different from what I thought. Let me note a few pitfalls.
First distinguish: Mijia’s “groups” are actually “rooms”, not folders
At first I thought that grouping was like a computer folder, where I create a group and drag devices into it. After rummaging around, I discovered that the real organizational unit in Mijia App is called “room”. The room tab at the bottom of the homepage may only have living room and bedroom by default. Click "Manage Rooms" to add and rename rooms. The entrance to assigning devices to a room is in the three dots in the upper right corner of each device's details page. There is an option to "move to another room."
The key understanding of this matter is: The room is not just a storage basket, it is a positioning unit that is fully linked to automation, scenes, and voice control. . I said "all bedroom off" to the speaker, and it turned off the devices in the "bedroom" room. ; In the home mode, only the entrance light should be turned on, provided that the light is really in the "entrance" and not the default "living room". My entrance light had always been placed in the living room. When I shouted "Turn off the lights in the living room" it went off. I thought the linkage was broken, but in fact it was placed in the wrong room.
Like me, there are so many devices that it’s a mess. Don’t rush to buy a hub or a gateway. First, sort out the ownership of these forty devices. This is how many “ineffective” automations can be cured. I’ve written about accounts and permissions before, and that’s when I took care of device sharing with my mother’s account. The one shared by family members There is a complete method.
Do one thing first before taking action: Change the names and group them again
The names must be changed before grouping, and the order cannot be reversed. I have two thermometers and hygrometers and three "smart sockets" at home. If they are grouped first, the two "temperature and hygrometers" in the list are placed under the same room label, and you still can't tell them apart. First change the names and then group them into groups. Put the location in the name, such as "Master Bedroom Thermohygrometer" and "Balcony Socket." When you return to the room, you can sit according to the name and you are done.
The rename entry is also on the device details page, just click Edit next to the device name. Here's a trick to save effort: If you have the same model of equipment at home, don’t include the model number in the name, but the location. . 「The name "Xiaomi Socket 2nd Generation" is useless at all. The three sockets are called like this, which means they have not been changed. 「"Kitchen Kitchen Treasure Socket" is a name that can be recognized at a glance.
There is another type of device name that cannot be changed - the name of the router itself follows the device name of the Xiaomi account in Mijia, and is a separate system from the device list on the router side. How to recognize the device list in the router's backend, how to change its name, and how to deal with the MAC address. The article about identifying equipment It's written in more detail. Don't mix up the two lists.: Mijia App manages Mijia ecological devices, and 31.1 backend manages all devices connected to WiFi.
My way of dividing: Not according to device type, but according to the scene of human activity.
The official default room template is the living room, bedroom, and kitchen. After actually sorting it out, I found that it was not enough to sort them out by house type. Among the forty devices, there were a group of devices that "follow people" and a group of devices that were "whole-house-type". The final decision is the three-level classification method:
| Equipment nature | return method | example |
|---|---|---|
| Fixed position | Return by room | Thermohygrometer, curtain motor, humidifier |
| follow people | Create a separate "portable" room | Children's watches for children, emergency buttons for the elderly |
| whole house property | Create a separate "system" room | Routers, gateways, hubs, sensors |
「System" This room is the one I recommend most. Devices such as gateways, routers, and hubs are not normally operated, but when problems occur, they must be found as soon as possible. They are piled in the living room tags, and I have to swipe through them every time to find them. ; Have a separate room, just click on it if there is any problem. Last month, a group of smart devices at home went offline. I first clicked on the "System" room to see if the red light on the gateway was on, and then checked whether the router was online. After two minutes, I found that it was on the router side. Press Mijia App offline troubleshooting Once you finish that set, you'll be cleared. The troubleshooting is quick and it is easy to find the equipment quickly.
「The "portable" room is, in turn, used to find someone. Your child's children's watch belongs here. It doesn't matter if it doesn't respond to voice control calls. The key point is that you can see the battery and positioning status of the watch with just one click on the homepage of the Mijia App. You don't have to browse through 40 devices. This idea is especially useful for those with elderly people at home. The emergency call button and fall sensor for the elderly are in one room. When something happens, you can just flip through the list in a hurry and find out.
The relationship between packets and router side: Two accounts, each in charge of its own affairs
Most of the pitfalls of grouping come from "thinking that Mijia grouping can manage the router." Let’s clarify the boundaries first: The room grouping in the Mijia App only affects the homepage display and automatic trigger range of the Mijia App. The speed limit, blacklist, and device list on the router do not recognize this grouping at all. You can't create a "children's room" group in Mijia and then expect the router to limit the speed of this group - the router switches devices one by one and has no correspondence with Mijia rooms.
If you want to do batch management on the router side, you have to take another route. In my home, I have a separate guest network for my children’s devices. More than 40 Mijia devices have their own main network and guest network, and the Mijia App is under unified control as usual. The guest network article There is a complete plan. If the router side limits the speed of that network segment, it is equivalent to realizing "group management by population" in disguise, which is more effective than grouping in Mijia - because Mijia grouping cannot control the traffic.
There is one more number to align: There is a limit on the number of routers that can be installed when there are too many devices. In my home, 62 devices crossed the line. The article about measuring with a machine Calculate the account. After the grouping was completed, I could count the number of gateway router hubs in the "System" room at a glance, and then compared it with the number of online devices in the 31.1 backend. If there was too much difference between the two numbers, it meant that there was a device ghost online (the record was not lost when it was offline). This is also a convenient inspection habit brought about by grouping.
Three things to review after changing the room
After being divided into groups, it is not the end. There are three linkages that will change accordingly. I missed two of them the first time.:
- Device pointing in automation rules : After moving the equipment in the room, the automation originally attached to it still recognizes it, but the scope of the rules triggered by "pressing the room" will change. After the entrance light was moved from the living room to the entrance, I no longer had it in my "living room full off" - this is the effect I wanted, but conversely, if it was moved by mistake, the linkage would quietly fail.
- Voice command coverage : After dividing into groups, shout "fully on" and "fully off" in each room through the speakers to see if any equipment leaks out of the network. I shouted "Turn off all lights in the bedroom" and one light was still on. Most likely, the light was still in the living room.
- Synchronization of family accounts : The room structure follows the home (family) account, and people who enter through family sharing will see the same grouping. My mother's account was divided into groups and she used it that night, so she didn't need to re-create it. How to give the scope of authority? Share the management article There is something to say.
By the way, I also went through the scene mode a few days after finishing the grouping. I have been using the router to determine whether the phone is connected to WiFi for triggering the home mode for two years. Go home and trigger that article I have written that after triggering, "turn on the entrance light" is executed. The direction of the equipment in this scene has nothing to do with the grouping. Don't think that it will move with it if you move the room - the scene is for naming the equipment, and the room is for storing the equipment, which are two different things. This is probably the most counter-intuitive thing about grouping.: You think it has been sorted out and categorized, but in fact, automation still recognizes each house number.
ending: Follow the order
Finally, I compiled the actual sequence of my afternoon into a list. If there are more than 20 devices, just copy them.:
- First, rename the devices of the same model one by one, with the name containing the location but not the model number. ;
- Add two custom rooms "system" and "portable" to the management room ;
- Equipment with fixed locations is grouped according to house type, equipment in the whole house is put into "system", and portable equipment is put into "portable".」 ;
- Shout once in each room and turn the voice on and off to fix any leaks. ;
- Go through the automation list and confirm that no rules have become invalid due to misplacement. ;
- In the future, when new equipment comes into the house, the first step is to change the location name, and the second step is to return to the room. It only takes ten seconds, so don’t waste time.
After finishing more than 40 pieces of equipment, my mother called again. I clicked on the "Bedroom" room and directly saw the humidifier - the water tank was dry, so I added water and it was done. Two minutes to find equipment turned into ten seconds, and the afternoon was well spent. No matter how many devices there are or how complex the room structure is, remember the boundary before taking action.: Mijia groups manage display and linkage, and the router background manages traffic and online. The two accounts keep separate records. Don’t expect one to manage the other.
