optical modem restarted itself several times overnight. I checked the power supply and firmware before I dared to call 10000.
Last month, my mother called and said that the WiFi at home kept cutting off in the middle of the night, and her phone automatically connected to it again in the morning. No one cared at first. Until one night when I went back to have dinner, I watched the optical modem in the living room turn on all the lights, turn them off, and then light them up one by one, one minute after another, and twice within five minutes. That one is Huawei HS8145V5 from China Telecom. It was installed in 2021 and will be five years old this year. When the equipment restarts repeatedly, I don't want to call the 10,000 number because I can't explain it clearly on the phone and there is a high chance that the technician's trip will be in vain. I checked it out in my own order, and I will write down the process in this article.
First distinguish between the two types of restarts: normal and pathological
Just because the cat restarts doesn't mean something is wrong. There are several types of restarts that are normal processes.: After a power outage, the PON light will flash for one to three minutes to re-register. The article about the PON light flashing during a power outage written in ; If the computer room pushes firmware and configurations in the middle of the night, the optical modem will restart itself once. After the restart, it will be stable, no more than once a night. This is the operator's hand moving. The principle is ITMS and TR-069 It has been dismantled.
What's sick is the style of my mom's phone.: Several times a night, irregular intervals, and occasionally during the day . Every time I restart, the broadband is disconnected. The WiFi icon on the phone is full and then circles, and then recovers in a minute or two. Counting reps is the first step, don't rely on feeling. My stupid method is to watch from 8pm to 11pm and restart it more than three times for three consecutive days, which will basically determine the outcome. Traces can also be found in the light mode log. Go to the background and look at the "system log" or "device log". A series of "system startup" records with close time points are more realistic than the naked eye.
On the first level, suspect the power supply first, and it is most reliable to measure it.
The number one suspect for repeated reboots is the power adapter. The original optical modem is usually 12V 1A or 12V 0.5A. After several years of use, the capacitor will age and the voltage will drop. If the optical modem is under-voltage, it will repeatedly restart itself. I've been through this trap before: My colleague's optical modem had erratic light fading and disconnected in the middle of the night. The last power supply was only 9.2V. I changed the adapter and it stopped. The process is written in The article about the broken optical modem power adapter inside. The first thing I did this time was to take out the multimeter and measure the no-load voltage.: My mother's unit measured 12.1V, which is normal, and the power supply is out.
There is a way to do it without a multimeter: If you have other equipment at home that uses a 12V adapter with the same specifications (many routers and old hard disk boxes have them), the caliber is of the same size, and the current is no less than the original one, try it out overnight. If it disappears after restarting, the answer is out. Spend twenty or thirty yuan to buy a new adapter and call it a day. Be careful not to mix the specifications randomly. Don’t make do with 9V for a 12V cat. The current can be high or low. All of these are explained in the 1091 article, so I won’t repeat them here. After measuring the power supply and there is nothing wrong with it, it’s the next level’s turn.
On the second level, look at the firmware. Don’t let the computer room take the blame.
The second suspicion is that the firmware has been pushed bad. Operators occasionally push new firmware to optical modems at night. Most of them are stable after the push, but some versions are not compatible with a certain batch of hardware, and they restart repeatedly after the push. This is not difficult to check: Go to the background to check the firmware version number, write it down, and check it again the next night. My mother's unit has the same version number for two nights, which means no new firmware has come in. Restarting has nothing to do with upgrading, so this is also ruled out.
I have a detail to remind you.: If you find that the restart started on a specific day, and if you look back and find the firmware version on that day, it will basically be the one that was pushed that night. At this time, it is useless to bother yourself. You can directly call 10000 and ask the computer room to check the push records, or simply report a problem and ask the master to downgrade the firmware. If the bridge user cannot enter the backend, be sure not to press reset randomly. The solution to clearing the registration data is The article about pressing reset by mistake Here, it is not expanded here.
Look at the light failure on the third floor, turn to the background and copy three numbers
The power supply and firmware are clean, all that's left is the optical path and the device itself. Enter the Optical Mode backend - user account, the password is on the sticker on the fuselage - look for the "PON Information" or "Optical Module Information" page, copy three numbers: Receive optical power, transmit optical power, and alarm records related to light attenuation. What I copied at the time was -24.1dBm. This Cat’s old value after five years has not deteriorated compared with history. ; Sending is also normal. Light decay is a thing that tends to increase a little every year. The network speed does not start to drop significantly until it is below -28, and the scale is at The light fades-28 article mentioned in. The light decay of my mother's machine is stable, which means that the restart is not a light path disease.
Take another look at the temperature and placement. The optical modem squats in a weak current box with routers stacked on top. In summer, the temperature inside the box can reach 50 degrees, and overheating will also trigger a protective restart. My mother's TV is open on the TV cabinet. It is warm to the touch but not hot to the touch, and there is no problem with heat dissipation. Only when it's hot needs to be dealt with, here's the solution The optical modem is hot There are three practical tests in it. At this point, the power supply, firmware, optical path, and heat dissipation have all been eliminated, and the only answer is the device itself.
After checking the third floor, all that’s left is that the equipment has reached its age.
The five-year-old Huawei cat, capacitors, flash memory, and optical modules are all on the aging curve. This kind of restart is not because a single part is broken, but because the whole machine is unstable. You can't repair it yourself, and you don't need to repair it.—— The optical modem is rented to you by the operator. If it breaks, you can replace it for free. , this property right account is in Should optical modem buy that article himself? Calculate it. My mother didn't spend a penny to get a new one. The master came to the house with the new cat and took away the old one.
If you say the right thing on the repair call, you can save yourself a lot of hassle. Don't say "the network is a bit stuck", just say it directly: The optical modem restarted itself several times in one night. The power supply was normal, the firmware version had not changed, and the light-24 was stable. It was suspected that the equipment was aging. I wrote these three sentences on paper and read them as they were read, and the operator directly dispatched the order without asking me to go through the process of restarting the optical modem and changing the network cable. On the day when the master came to visit, I showed him the three numbers I copied, and he measured the light, changed the cat, and left, twenty minutes before and after.
Copy down these numbers before reporting for repairs
The most useful action in the whole process is to copy the numbers. Just talk about "Old Restart", the operator can only follow the script ; Bring the data and a list will be sent directly to the installation department. I've put everything in the table that should be copied.:
| To copy | where to look | normal look |
|---|---|---|
| Number of restarts and time period | Keep an eye on the number for three nights, or the background system log | 0 times a night ; Occasionally occurs once after receiving a call or pushing firmware. |
| Power supply no-load voltage | Multimeter measurement adapter output | 12V measures more than 11.5V |
| Firmware version number | Backstage "Device Information" page | No change every other night |
| Received light power | Backend "PON Information" page | -Stable within 25, not high or low |
| placement and temperature | Hand touching the shell | Warm but not hot, not stuffy around you |
Finally give it all: After repeated restarts, I checked that the power supply and firmware were the two major problems, and the aging of the equipment was the remaining major problem. The optical path was the smallest. Don’t do the reverse order - measure the power supply first and then report for repair, it only takes a minute ; I made a repair call as soon as I got there, and the technician came to check if the power supply was OK. I had to check again myself later. After upgrading, remember to ask the master to verify the changed configurations such as bridging and IPTV. The list of parameters is in The article about copying the parameters before changing the optical modem inside. It’s been more than a month since my mother’s station was replaced, and it hasn’t restarted. It hasn’t called me out again while watching a show at night.
