Home • All articles published on 2025 Year 12 Month
-
OECT flashes flying bull, and after installing openwrt with docker, it cannot enter openwrt
After OECT brushes Feiniu, OpenWrt running in Docker can't get into the background, 90% of it is "macvlan completely separates the host from the container" - that is, you can ping OpenWrt from your phone or computer, but Feiniu itself can't open 192.168.x.x, so you think it's "not started", but it's actually fine, but you didn't build it &......
-
Upgrading PVE 7.2 to 9.1 can only be reinstalled
Upgrading Proxmox VE 7.2 to 9.1 does not have to be reinstalled, both the official and the community provide two ways to upgrade: directly use apt to upgrade (no need to reinstall the system) first back up the original virtual machine and container, then install the 9.1 ISO and then import the backed up virtual machine/container back to apt upgrade, you can't directly upgrade from 7.2 to 9.1 with a large span (Debian 11→13, kernel, virtualization suite are all replaced), the official upgrade article......
-
N1 can brush the flying bull, can the player cloud brush?
Feixun N1 can now brush Feiniu OS, and the official has given an ARM internal test package; OneCloud is completely unswipeable for the time being, and there is no hope in the short term. 1. Hardware difference: 64-bit vs 32-bit is the maximum threshold N1: Amlogic S905D, quad-core Cortex-A53, ARMv8 64-bit, 2GB memory, Gigabit network port, and a lot of community information. Players say: Amlogic S805, quad-core Cortex-A5, ARMv7 3......
-
Install an agent on the Feiniu NAS to automatically find movies and TV downloads
There are a total of 3 ways to "automatically find movies and TV → download→ and warehousing" for Feiniu NAS, and press "Zero Command Line"→ "Geek Edition"→ and "AI Agent" from easy to difficult. Zero command line: Overview of one-click matryoshka steps in the Flying Bull Application Center: (1) Install qBittorrent in the Application Center (2) Install Nastool (or MovieBot) (3)......
-
How to log in or set up a customer management system with an IP address of 192.168.1.1
192.168.1.1 is not the public login address of a certain "customer management system", but the default private network management address of most home/small business routers. To "log in" or "set up" it, you essentially enter the background of the router, and then find "Customer Authentication", "Portal Management", "User Bandwidth Control......
-
The router is bricked, can the original NAND be replaced with spi flash?
Let's talk about the conclusion First, as long as the motherboard meets the following three conditions at the same time, the SPI-NAND Flash on the original machine can be replaced with SPI-NOR Flash to revive the "brick": The PCB reserves an 8-pin SPI-NOR pad (or you can fly the wire to solve it). The SoC boot pin can be switched to SPI mode (usually pulled up and down by 0 Ω resistor or empty pads). You can get "... ...
-
Black Panther X2 flashes OpenWrt: TF card can run, but eMMC is "lost"? A brick saving note takes you to revive in place in 10 minutes
1. Review of the phenomenon According to the tutorial on the Internet, write openwrt-rk3566-panther-x2-ext4.img to the TF card with Win32DiskImager, power on → the network port light is on→ the computer gets 192.168.1.1 → everything is fine. I want to permanently move the system into 32 GB eMMC, so dd if=xxx.img of=/dev/mmcbl......
-
BE88U Single-Line Three-Use (Dial-up + IPTV + Wired Backhaul) + Mesh + VLAN Switch Problem?
Problem: The WAN port is made into 3 VLAN subinterfaces in the main route: 41-PPPoE (Internet access), 43-Bridge (IPTV), and 50-Bridge (LAN), and the LAN port is on VLAN50 by default, and the IPTV box can broadcast the number normally when plugged into the LAN port. The problem now is: the secondary route cable shakes hands quickly but gets the IP slowly, and you can't even get it; The terminal occasionally gets a 169.* or 10.* address, and the Wi-Fi seems ......
-
Luban route stuck on the boot page after swiping U-Boot? A brick-saving note will bring you back to life in place
Fault phenomenon After flashing U-Boot (or Breed) for Luban (CreativeBox-CB3), the web background can no longer enter the system, and as soon as the browser is opened, it is the "U-Boot update page" - upload, restart, upload, dead loop. TTL serial port observation, and found that the machine always stops at Hit any key to stop autoboot, while manual bootm ... ...
-
Beijing Mobile replaces 2.5G optical cat XG-040G-MD by itself
Beijing Mobile 18 low-consumption broadband, add 18 yuan to speed up to 1000M, and the maintenance brother said that this situation could not replace the 2.5G cat, so he had to do it himself. Little Yellow Croaker Tao XG-040G-MD Mobile Version, the default password CMCCAdmin/aDm8H%MdA cannot be logged in, nor can it be reset. I had no choice but to take out the TTL method and do it according to the posts of the gods. I rarely go to the forum, so I made a note and posted a post for my Beijing mobile friends in need. 1. Connect TTL to TTL programming......

