Home • 192.168.0.1

帮小林他爸找定时断网的开关，我在tendawifi.com里翻了快十分钟。翻完干脆把腾达后台画成一张地图：三个抽屉一个阁楼，常用设置各住哪、App替不了哪几样、哪三个开关别乱碰，一篇当目录用。...

The Xiaolin family's Tenda AX12 changed its password twice and was even exploited by neighbors, so they decided to remove the WiFi name from the list. Tenda's switch is simply called 'wireless signal name hidden,' but the old model is buried in system management. The new model requires checking the hidden network once each for 2.4G and 5G. After hiding all four systems, manually add the four systems, leave the 2.4G on the vacuum cleaner without hiding, and close WPS to consider it completely hidden....

What is the power supply voltage for a Mercury router? The D191G, MAC1200R, and M6G are almost all 12V 1A, but the older MW310R models have 9V 0.6A plugs that are exactly the same. My cousin used Old Mercury's head to snuggle the new device, and the sticker difference was 3V. Model comparison, the consequences of plugging in the wrong one, and buying a new power supply—these three key steps are explained in one article....

After helping my cousin change DNS on his cloud router, I dug back MAC1200R an old wanted to set up a relay, but couldn't find any advanced settings in the backend. Then I remembered that Mercury's official tutorials are divided into two versions: the new interface and the old interface, with completely different menu layouts. I matched the positions of common functions like dual-band, DNS, speed limiting, and port mapping, and followed the chart to avoid getting lost....

My cousin bought a second-hand Tenda AC10 for 50 to 60 yuan, wanting to flash OpenWrt as a side router, and the seller immediately said it could be flashed. I turned Enshan inside out and inspected for him: the Mercury model used a custom TP1900N chip with 4MB flash memory, and the flash door was soldered shut right out of the box; Tenda can handle it, but AC9 depends on the flash version, and AC10 still needs to be identified as V-type first....

Helping my cousin rearrange the weak current box, the Mercury's system light stayed on quietly, while the Tenda AC10 system light kept flashing beside him. He thought Tengda was about to break. This article explains exactly what the SYS, WAN, and LAN lights on Tenda's panel are responsible for: Tenda's rules are the exact opposite of the new Mercury model—SYS flashing is the real heart rate, staying on and not moving is actually a problem, and the machine used as an AP has to read the lights according to the position....

My cousin filmed a video late at night asking if the Mercury router's light kept flashing and if it was infected, but what he was staring at was actually the data light on the WAN port. This article explains what the SYS, WAN, and LAN lights on the Mercury panel each govern: the old SYS model flashes slowly normally, the new model stays on normally. It also provides a three-layer positioning sequence for checking the lights when the network is off, so you can identify the fault segment before proceeding....

A neighbor girl got a router, and on the same page, two Mercury MAC1200R differ by 20 yuan. Upon checking, she realized one had a 100G port and one a gigabit port, but the model numbers were exactly the same. I'll break down the Mercury model segments by segment: the positioning of the G tube network port, digital tube wireless speed mode, and the Phantom Light Shuttle M series. I'll also clarify the pitfalls of the Tenda AC, AX, and Pro suffixes, so you won't regret ordering after reading....

The entry point for changing DNS on Tenda routers is in the tendawifi.com's internet settings, while older AC series models are hidden in the WAN port settings under network parameters. The first and backup boxes cannot be filled with the same address; I only found out when I was rejected from my save. WeChat can send a webpage but it won't open, and changes won't take effect—this article explains everything in one detail....

My cousin's Mercury router kept showing requests failing when binding MERCURY ID. The official customer service asked me to change the WAN port DNS, but no matter how many times I checked the WAN port settings, I couldn't find this box. This article notes the real entry point for changing DNS on Mercury, how to choose DNS, and three pitfalls where the fix doesn't take effect. The ugly saying that DNS doesn't speed up is also mentioned upfront....