Home • All articles published on 2026 Year 10 Month - Page 18
-
The ZTE RAX3000Z gifted by China Mobile shares the same name and hides two chips; I got the one that was just okay
The ZTE RAX3000Z provided by mobile broadband is not managed at 192.168.1.1 but 192.168.10.1, with only user accounts in the backend and many menus grayed out. There's also a computing power version of the same name, which is a flashing machine with MT7981B chips. Mistakenly swapping the version for flashing is a waste. I've sorted out both versions and job assignments....
-
Giant Frame is a hidden switch for 10Gbps intranets. After turning it on, I tested it: Gigabit is only six points faster
Giant frame rates scale the network card's MTU from 1500 to around 9000, pulling six times the load in one trip, and the CPU receives less interrupts by five-sixths. In my test on a gigabit intranet, it was only six points faster; 10 gigabit is its main arena; If one of the three settings is missed, the network will quietly drop large packets, causing files to freeze halfway through....
-
On NAS, Docker runs ddns-go, dynamic domain names update automatically, and even if you change IPv6 prefixes, it still keeps up
The public IP at home changes every few days, and the domain name is still stuck at last week's address. ddns-go is installed on the NAS, and a single Docker container management is handled by about twenty service providers. The IPv6 prefix can be replaced in five minutes, and with a webhook, it can even push phone notifications. I wrote down the deployment and the three pitfalls....
-
No public IP, FRP intranet penetration connects to the home NAS, with over thirty servers being relayed
My cousin's mobile broadband doesn't have a public IP address. IPv6 direct connection works, but his company's WiFi doesn't have v6. During the day, Synology can only get 500KB per second for free relay to connect to our home. I helped him rent a cloud server costing over thirty yuan a year. The server ran FRPS, and the NAS had an FRPC container. Once it was running, anyone could connect home from any network. The full configuration file and the token pitfall I fell into are both posted below....
-
My cousin was renovating and needed to switch to an integrated fiber optic cable. I spent the whole night arguing about the difference between fiber and network cables
My cousin was renovating and wiring and was carrying a box of Category 6A cables, asking if I should also replace the yellow cable I had for my home with a good one—he thought fiber optics are a type of network cable, and a thicker one would speed things up. Fiber optic light transmission, network cable power transmission—from distance and anti-interference to manual joints—I'll explain the differences between the two types of cables in one go. You won't regret reviewing before renovation wiring....
-
NAS can run website servers, but three hurdles mean it's only suitable for your own people
Can I install a website on my home NAS to save a year of server costs? I went through all three hurdles: port 80, public IP, and filing: technically, it works perfectly, and there are indeed people with a home broad platform, but if you really want to show it to outsiders, the cost calculation is still much less worrying than just a few dozen yuan a year on the cloud platform. The proper use of NAS is to visit websites that are only for your own people....
-
Phone transfers, screen casting, and direct printer connections all use WiFi Direct
The night I got the printer, my phone connected to a WiFi device starting with DIRECT-, searched the router's backend, but couldn't find the printer—it hadn't even passed through the router. Screen casting, Android transfer, and direct printer connection all follow the dedicated WiFi Direct line. Even Apple AirDrop has its own tricks. This article explains the mechanisms and pitfalls thoroughly....
-
Even without a public IP, IPv6 can still connect directly home, but the address will change and the firewall must be balanced
My cousin's home mobile broadband doesn't have public IPv4, so port forwarding is free. I helped him navigate the IPv6 direct connection route: just enter the v6 address on the home NAS for mobile data and you can access it. The pitfalls are concentrated in two places: the address changes and the firewall has two layers, the prefix changes every 24 hours, and the browser requires square brackets—I stepped on them all....
-
When the speed drops to 93 Mbps, there's no sign of issues; it's probably static electricity driving the gigabit network card down to 100 Mbps
Old Sun upgraded to gigabit broadband just two months ago, and his computer's speed test dropped back to 93 Mbps. The optical modem was fine, I replaced two network cables, and the router ports were also changed, but none of it worked. In the end, it turned out that when I plugged in the network cable in winter, I was hit by static electricity and the gigabit network card was damaged by two pairs of cables, quietly dropping to 100Mbps. This disease is the hardest to detect because it can still be accessed online....
-
Port forwarding doesn't work at home and works when out, NAT return is the fault—no need to change the rules
At home, I connected to WiFi to access my own public IP address, but no matter how I tried to tap it, it wouldn't work. As soon as I stepped out, I cut off my phone's data and instantly connected. This isn't a port forwarding error; it's NAT backflow causing trouble. I walked through every step of the bag before I figured it out. The three outcomes corresponded to each type, plus three simple methods that could be done at home....

