Home • 192.168.0.1 - Page 3
-
How to hide WiFi signals on a Mercury router? After scanning the backend, you won't find the word "hidden"; the switch is actually called wireless broadcasting
If the Mercury router wants to hide the WiFi signal so others can't find it, it's normal to search the melogin.cn and still not find the switch—it's not called hiding, it's called turning off wireless broadcasting. 2. 4G and 5G each have a switch. After hiding new devices, you have to manually add the network. Vacuum cameras and cameras are also hidden. I've listed all the pitfalls I've made for you....
-
How to set up port mapping on a Mercury router? Connecting to the home NAS on foreign networks always fails, but melogin.cn can be solved in five steps
Mercury routers do port mapping by adding a virtual server rule to the melogin.cn's advanced users. To run a FeiNiu NAS at work and home, I went through every pitfall of external ports, internal ports, static IPs, and CGNAT one by one. Five steps to setup and four steps for troubleshooting are all in this article....
-
How does the Mercury router limit children's internet time? Parental control was set up in just three steps, and I almost cut all the devices in the house from the internet
The Mercury router limits children's internet time. By accessing melogin.cn advanced settings, internet control, and parental control, it can be set up in just three steps. But devices not added to the parents' list are all treated as children. My home camera and speakers all went offline at night, so I checked these pitfalls first before taking action....
-
How to enable IPv6 on a Tenda router? There is only one switch in the tendawifi.com, but choosing the wrong WAN mode is equivalent to a wasted opening
Complete process for enabling IPv6 on Tenda router: Go to tendawifi.com more settings and find the IPv6 switch. The key is to select the correct WAN connection method—choose DHCPv6 for optical modem dialing, PPPoEv6 for router dialing. If you choose the wrong option, you won't get the address after waiting a long time. The older AC10 could be upgraded with firmware, but the AC9 generation didn't have official firmware at all, so don't force it....
-
How to remotely manage a Mercury router? By binding a MERCURY ID once, you can also change your password and kick the device while you're at the office
With the Mercury cloud router, you can bind your MERCURY ID once, install the Mercury WiFi App on your phone, and you can view devices on the internet, change WiFi passwords, limit your speed, and kick people out—even at the office, you can handle the network at home. But there are three things you can't do remotely: iPhones can't detect it, notifications for offline contact, and how to unbind second-hand items. I've written them all in the order of pitfalls....
-
How do you set up the Mercury router guest network? melogin.cn opened a customer-only network every two steps, and my NAS at home was never checked by relatives again
When relatives come to your home asking for WiFi, directly giving the mainline password is equivalent to giving away the home key. My Mercury D191G has guest network enabled, and it can be set up in just two steps within melogin.cn. Guests can access the internet but can't access the backend or access the NAS. This article notes the setup path, speed limit values, and three pitfalls I've encountered....
-
How to enable IPv6 on a Mercury router? The switch is hidden deep inside the melogin.cn, and after turning it on, connecting remotely to the NAS is really convenient
Complete process for enabling IPv6 on a Mercury router: Go melogin.cn the backend, go to the network parameters, select IPv6 switch, set the internet access mode to automatic, save and reboot, and verify with test-ipv6.com. The biggest change after enabling remote connection to NAS is that you no longer need to use internal network travers. I've also encountered the same issues with optical modem router mode and firewall....
-
How to check who is freeloading on a Mercury router? Browsing the device list in 192.168.0.1, I found two unfamiliar phones
Checking who is connecting to your home WiFi on a Mercury router is not complicated; melogin.cn or 192.168.0.1 goes to the backend, and the online list in device management is clear at a glance. Three tricks to recognize people, the difference between banning and blocking, and the pitfalls of random MAC swapping identities—I tested them all with my D191G at home and just followed them....
-
How to upgrade the firmware of a Mercury router? The entire series does not automatically upgrade; the official website download should first focus on the hardware version
All Mercury routers do not support automatic upgrades; firmware updates must be manually downloaded from the official website. Step-by-step guide to copying model and hardware versions, searching for firmware on the official website, extracting and uploading in six steps, plus life-saving details like power outages and after-sales hotlines....
-
How to set up wireless bridge on a Mercury router? The old machine serves as a secondary router to supplement the room signal. After bridging the backend and unable to enter, don't worry
Don't throw away the old Mercury router at home—switch to wireless bridging as a secondary router, add a six-step guide for hallway slotting, and upgrade the study signal from two bars to full. It's normal to be unable to access after bridging 192.168.0.1, but the change in management IP made me panic for the first time too....
