Tutorial on Mercury router settings not matching, matching both the old and new interface functions

Last week, after helping my cousin's D191G change its DNS, I casually dug out an old MAC1200R that's been gathering dust in my drawer for years, hoping to switch it to a relay to supplement the signal for the study. But after scrolling through 'Advanced Settings' in the backend of an old machine, I spent ten minutes — and those four words didn't appear at all. I clicked through the menu from top to bottom, and every page didn't match the tutorial screenshots. At that moment, I realized that Mercury's backend consisted of two completely different interfaces.
1. Mercury really has two interfaces, and the official tutorials are written separately
My
cousin's D191G is a first-generation cloud router. When melogin.cn you enter the browser, the homepage shows several large cards, and in the top right corner is a "Advanced Settings" button. Clicking it reveals menus for network parameters and wireless settings, which are stored away. But my old MAC1200R was a whole different world inside: on the left was a vertical text menu, running status, settings wizard, network parameters, wireless settings, DHCP server, forwarding rules, IP bandwidth control, system tools—all arranged from top to bottom, with all functions laid out in the open.
This is not a machine malfunction. For the official Mercury service support document, I wrote two separate tutorials for the 'New Interface' and the 'Old Interface.' The new interface articles all start with the original sentence: Different Mercury routers may have different setup interface styles. For different interface styles, please refer to the old interface tutorial. In other words, if you follow the illustrated tutorials you found online, the screenshots show the new interface but you're on an old machine, and the menus don't match and you can't find them. It's not just a matter of eye contact—it's that the menus of the two versions don't even match each other.
One more thing to be clear first: the two interfaces cannot be manually switched; what they look like depends on the model and firmware version. Some older models upgrade their firmware to the latest version, and the interface will be updated accordingly. Before upgrading, remember to check the hardware version. Flashing between V1 and V3 packets can cause problems. I've written a detailed firmware upgrade guide for this area.
Move 2 and 3 to identify which interface the machine in your hand is
No need to remember the model year or year; just glance three times in the backend and you'll be able to tell it. At this login step, both sides have the same door: melogin.cn or the IP printed on the bottom sticker. If you can't open it, first press go through the login troubleshooting section. Ninety percent of the time it's stuck because the address is wrong and the person isn't on this network. After entering, look at the three spots below.
| The new | interface looks like | this,the old interface looks like this |
|---|---|---|
| The homepage layout | includes several large cards, with functions stored in the "Advanced Settings" top right | corner. On the left side is a row of vertical text menus, fully unfolding |
| functions and cloud functions | At the top, you can log in to the MERCURY ID, and the app can bind remote management | withoutan ID entry. You can't find this machine in the app |
| Typical devices | like the D191G are MAC1200R older models from recent years like the D191G |
The third tip is especially useful when buying second-hand old machines. For older models like MAC1200R, the same name comes in two batches: 100GB and Gigabit versions. The second-hand pages look exactly the same, but the price difference is 20 yuan. Before buying, you must check the back case stickers for a glance. The full method for identifying stickers is written in the article How to Identify the Model.
3. The wireless issue: names, dual-band, hidden, visitors
The wireless functions of the old interface are concentrated in the "Wireless Settings" menu on the left: this page mainly sets WiFi name, password, channel, and even the hidden signal toggle is on this page, with a checkbox; The encryption method is switched to the "Wireless Security" submenu. Each family has its own address, easy to recognize.
The new interface has broken them down and reorganized: in the top right corner, "Advanced Settings" → "Wireless Settings." Dual-band machines are further divided into two sets: 2.4G wireless settings and 5G wireless settings, each managing its own "master network." If you want to split two bands into two different names, the switch you need to turn off isn't called 'dual-band integration,' but 'multi-band integration.' On Master Network, my cousin's 500MHz broadband is stuck to 2.4G and only runs 180MHz. After turning it off, it immediately returns to 480 ( split dual-band full record). Hiding WiFi is the same idea. In the new interface, the switch is called "SSID Broadcast." It's normal not to find the word "hidden," but the tutorial simply copies the old interface terminology and it's even harder to find ( this article on hidden signal). If you set up a guest isolation net, go to the wireless settings → guest network, open one every two steps, and even if your relatives connect, they won't be able to access your NAS ( guest network settings).
4. Internet access and segments: WAN port, DNS, IPv6
In the old interface, change the internet access method. Select 'Network Parameters → WAN Port Settings' and enter your broadband account and password here; Change the router's own LAN port IP in the "Network Parameters→ LAN Port Settings. If you run into the optical modem segment, this is the part you need to move. After making changes, remember to check the DHCP pool ( the entire LAN IP change process).
The new interface also goes from 'Advanced Settings → Network Parameters.' WAN port settings remain in the old position, but the most hidden part is manual DNS—it doesn't set up the main page on the WAN port, but requires clicking 'WAN Port Advanced Parameters.' I also went the wrong way on my first trip and wasted three rounds ( Mercury changes DNS). IPv6 switches are also at the network parameters level; one switch plus one internet access method is enough ( Mercury enables IPv6). Don't keep stubbornly battling old interface machines; most don't even have this feature. It's true that they don't exist, not that you haven't found it.
5. Manage equipment: Ride the net, speed limit, parental control
Checking who is freeloading the web, the biggest difference is place: the new homepage has a "Connected Devices" card, making device management more comprehensive; The device list for older machines is hidden somewhere you wouldn't expect—the 'DHCP server → client list.' The first time I searched, I clicked the left menu from start to finish, but eventually found it hanging under DHCP ( the entire web search process).
Limit device speed: In the new interface, click the device name in Device Management, then fill in the numbers directly in the downstream and uplink boxes; The old interface feature is called "IP Bandwidth Control," which sets rules by IP range. The front still requires binding static IPs to the device first; otherwise, DHCP drifts rules and is useless ( speed limit reference number). Managing children's internet time is in the new interface under "Internet Control → Parental Control" — three steps to set it up, but it has a big pitfall: devices outside the parent's list are all managed by the child, and the home camera speakers will all be disconnected at night ( parental control pitfall).
6. Common functions for aligning a table; if you can't find them, follow this order
Port mapping is the biggest difference between the two names: the old interface was called 'Forwarding Rules→ Virtual Server, while the new interface moved to 'Advanced Settings → Advanced User →Virtual Server'—the name doesn't match a single character. My colleague followed the new interface tutorial to find 'Advanced User' on the old machine, and it took half an hour ( five steps of port mapping)。 Factory Reset and Configuration Backup: The new interface is under "Device Management→ Restore Factory Settings. Backup and import are on the same page. Export the configuration files before resetting to save the whole family from a reconfiguration ( Three Things to Save Before Factory Restore); These two old interfaces are now under the 'System Tools' menu.
| What to do: | Location of the old interface | and new interface |
|---|---|---|
| Location: Change WiFi name, password, | channelwireless settings→ basic settings | , advanced settings→ wireless settings→ master network |
| and hide WiFi signals | Wireless Settings → Basic Settings (Wireless Broadcast Checkbox) | Wireless Settings → Host Network (SSID Broadcast Switch) |
| Open Guest Network | Wireless Settings (some older models do not | have this)Wireless Settings → Guest Network |
| Check connected devices | DHCP server → client list | Home Connected Devices and Device Management |
| Set device speed limits | , IP bandwidth control (set rules by IP range), | Device management (fill in vertical and downlink lines directly by pointing to device), |
| manage children's internet time | , security functions or parental controls (varies by model), | internet access control→ parental control |
| Port mapping | and forwarding rules→ virtual server | advanced user → virtual server |
| Factory reset, backup configuration | system tool | device management→ factory reset (same page backup |
Mercury WiFi App adds another division of labor: it can do daily tasks like checking online devices, changing WiFi name and password, and turning guest networks on and off; Parental controls, port mapping, manual DNS and other advanced operations are not found in the app; just obediently return to the webpage backend ( remote management tasks).
If you really can't find the menu, follow this order: First, check the interface to see if the homepage is a card or a vertical left column. Don't rush to click; Step two: follow the table above and search for the name in the corresponding column. Don't use new names to search for tutorials on old machines, and vice versa. Step 3: Take a screenshot of the tutorial: First, check the homepage appearance. If it doesn't match what you have, switch to another post—don't force the steps together. Step 4: On an old machine, look for IPv6 or app binding and other new features to abandon immediately. If hardware and firmware don't support them, try on a new machine. The two interfaces are just the menus that look different; the rules are the same: Mercury doesn't have a default management password—if you forget, you have to restore the factory. Before you start, copy down your broadband account and WiFi password—these actions are the same for both.
