Home • 192.168.0.1 - Page 4

My cousin bought a second-hand Tenda AC10 for 50 to 60 yuan, wanting to flash OpenWrt as a side router, and the seller immediately said it could be flashed. I turned Enshan inside out and inspected for him: the Mercury model used a custom TP1900N chip with 4MB flash memory, and the flash door was soldered shut right out of the box; Tenda can handle it, but AC9 depends on the flash version, and AC10 still needs to be identified as V-type first....

Helping my cousin rearrange the weak current box, the Mercury's system light stayed on quietly, while the Tenda AC10 system light kept flashing beside him. He thought Tengda was about to break. This article explains exactly what the SYS, WAN, and LAN lights on Tenda's panel are responsible for: Tenda's rules are the exact opposite of the new Mercury model—SYS flashing is the real heart rate, staying on and not moving is actually a problem, and the machine used as an AP has to read the lights according to the position....

My cousin filmed a video late at night asking if the Mercury router's light kept flashing and if it was infected, but what he was staring at was actually the data light on the WAN port. This article explains what the SYS, WAN, and LAN lights on the Mercury panel each govern: the old SYS model flashes slowly normally, the new model stays on normally. It also provides a three-layer positioning sequence for checking the lights when the network is off, so you can identify the fault segment before proceeding....

A neighbor girl got a router, and on the same page, two Mercury MAC1200R differ by 20 yuan. Upon checking, she realized one had a 100G port and one a gigabit port, but the model numbers were exactly the same. I'll break down the Mercury model segments by segment: the positioning of the G tube network port, digital tube wireless speed mode, and the Phantom Light Shuttle M series. I'll also clarify the pitfalls of the Tenda AC, AX, and Pro suffixes, so you won't regret ordering after reading....

The entry point for changing DNS on Tenda routers is in the tendawifi.com's internet settings, while older AC series models are hidden in the WAN port settings under network parameters. The first and backup boxes cannot be filled with the same address; I only found out when I was rejected from my save. WeChat can send a webpage but it won't open, and changes won't take effect—this article explains everything in one detail....

My cousin's Mercury router kept showing requests failing when binding MERCURY ID. The official customer service asked me to change the WAN port DNS, but no matter how many times I checked the WAN port settings, I couldn't find this box. This article notes the real entry point for changing DNS on Mercury, how to choose DNS, and three pitfalls where the fix doesn't take effect. The ugly saying that DNS doesn't speed up is also mentioned upfront....

How do you set up Tenda routers for 2.4G and 5G separately? A colleague's 300 Mbps broadband phone only has 90 Mbps up close, and the phone sticks to 2.4G. I wanted to disable dual-band integration, but found that the old and new firmware names are different: the new model is called dual-band integration, while the old AC10 is called dual-band optimization. This article explains the paths and aftermath of the two interfaces in one go....

How do you set up Mercury router 2.4G and 5G separately? My cousin's 500 Mbps broadband face-to-face speed test only shows 180 Mbps, and the root issue is that the phone sticks to 2.4G. Want to remove dual-band but can't find 'dual-band integration' in the backend? The Mercury tube switch is called multi-frequency integration; turning off the name and password boxes of the two bands is independent for each band. ...

Mercury router Mesh networking doesn't require entering the backend to check parameters; both machines just press the Mesh button once. My friend helped me get an M6G to supplement the bedroom signal. I helped him clear all the pitfalls like the sub-router always running a red light and pressing the wrong reset. Here's some back-trip speed test data....

Last National Day, I gave my mother-in-law's WiFi password to relatives, but by November the internet speed was lagging and three strange phones appeared on the device list. This year, when a relative came again, I enabled guest network on that Tenda. I didn't give a single word of the mainnet password, and the app could automatically shut down on time, so the internet would be cut off automatically when someone left....