1. Current Location: Home >  Comprehensive classification >  Whether to install 100M, 300M or Gigabit broadband, you won’t have to worry about it after calculating the three accounts.

Whether to install 100M, 300M or Gigabit broadband, you won’t have to worry about it after calculating the three accounts.

Comparison chart of how many megabytes of broadband is enough: 100 MB to 300 MB Gigabit download speed conversion, concurrent occupancy of the whole family at 8pm, three accounts to be seated

My cousin's new home broadband was installed, and the business office immediately recommended Gigabit. It was 20 yuan a month. He called me and asked me if it was worth it. I have a strong say in this matter - I have used 100M, 300M and Gigabit all before and after, and I have also spent money unjustly. This article breaks down the three accounts and you will know how much you should install in your home after reading it.

First translate "mega" into human words, how fast is a 100 megabit download?

The "mega" in the operator's mouth is Mbps. To convert it into the download speed we are familiar with, MB/s, you have to divide it by 8. Therefore, the theoretical download of 100M broadband is 12.5MB/s, 300M is 37.5MB/s, and Gigabit is 125MB/s.

I can’t feel it just by looking at the numbers. Let me take downloading a 2GB movie as an example.: 100 Mbps takes two and a half minutes, 300 Mbps takes just over a minute, and Gigabit takes 17 seconds. The rules come out: From 100 to 300, it means "from having to wait to not having to wait."」 ; Going from 300 gigabit to 1 gigabit means "from one minute to a shorter minute." The marginal experience of the latter amount of money decays very quickly.

Package level Theoretical download speed Download 2GB movies
100 trillion 12.5MB/s About 2 minutes and 40 seconds
300MB 37.5MB/s about 55 seconds
Gigabit 125MB/s about 17 seconds

There is also a common recognition confusion: This is a total pool shared by the whole family, not 100MB exclusive to each device. Your TV, mobile phone, and computer all add up to this pool. Whoever uses it will occupy it, and whoever robs it will get it.

When settling accounts, there is an item that is easy to overcount: IPTV set-top box sent by the operator. It uses an independent multicast channel and does not squeeze into the broadband pool. No matter how much you enjoy watching TV, it does not occupy megabytes. But OTT boxes like the Xiaomi box that you buy yourself are different. They use WiFi to run Internet traffic, and they cost you 25 MB when watching 4K. When calculating the occupation of my house, China Telecom's IPTV is simply crossed out, and the old Xiaomi box in the living room is included - just this difference, many people's accounts are considered skewed from the beginning.

first account: Occupancy is calculated based on head count. It depends on what the whole family is doing at the same time at 8pm.

Whether the bandwidth is sufficient? Don’t look at the daytime, but look at the moment when the whole family is concurrent during the evening peak. I have listed the amount of bandwidth consumed by common usages. The numbers are all measured calibers.: 1080P short video is 5 to 8 MB, 4K online video source is around 25 MB, children’s online class live streaming is 3 to 5 MB, and WeChat video calls are 1 to 2 MB. The most counter-intuitive thing is gaming - the connection itself requires less than 1 MB. What it requires is stable latency, which has basically nothing to do with bandwidth. Don't go to Gigabit just to play games. That's spending money on the wrong ledger.

What are the family doing? How much bandwidth does it take?
Flash 1080P short video on mobile phone 5-8 trillion
Watch 4K online film sources on TV Around 25 MB
Online class live broadcast (teacher side screen) 3-5 trillion
WeChat video call 1-2 trillion
Game console online Less than 1 trillion, delayed eating
Computer hanging download If you want to run to the fullest, run to the fullest

Take it from my family: At eight o'clock in the evening, my wife's 4K TV takes up 25 MB, my mother's short video on her phone takes up 6 MB, and my children's online classes take up 4 MB. I hang on to Steam updates and grab the rest. The first three items are fixed at 35 MB, and the normal concurrency for three people is about 40 MB. 100Mbit is actually barely enough, and 300Mbit is still a solid margin. This is why I say 300 trillion is the “sufficient and confident” dessert level.

When will 100MB be the top limit? When I was a couple, one was watching a 4K TV and the other was projecting a 4K concert. The two stacks were 25 MB each, and the background of my mobile phone automatically updated the photo album, which directly reached more than 90 MB, and the screen started to spin. One sentence summary: 1 to 2 people, no 4K TV, no downloading, just use 100MB ; If you have a second 4K screen at home, it will cost you 300.

second account: Gigabit is a matter of equipment for the whole family. A shortcoming is completely useless.

This is a lesson learned with real money. In the first year of upgrading to Gigabit, my desktop computer plugged in the network cable and measured 122 MB/s, which was fine, but my wife’s mobile phone only had 50 or 60 MB/s. After checking for a long time, I found out that it was an old WiFi5 machine with a negotiated rate of 867Mbps, which looked quite high, but the actual throughput was capped at 500Mbps or 600Mbps - the shortcomings of mobile phones cut out nearly half of Gigabit broadband.

To reach full Gigabit capacity, every link in the entire link must be Gigabit.: The optical modem must be plugged into a Gigabit port. Many optical modems only have Gigabit network port 1, and the IPTV port is 100 Mbit. If you plug it in incorrectly, it will drop to 93 Mbit/s ( The article I wrote about the distinction between optical modem Gigabit ports There is a comparison table) ; The network cable in the wall must be eight-core and all-passing, and the four-core cable can only be 100 Mbit/s ( Crystal head wiring You have to pay attention when ; The LAN port of the router and the switch in between must be Gigabit ( Switch purchase Don’t be greedy for cheap and buy 100 Mbps) ; The WiFi specifications of mobile phones and computers must also keep up. I am negotiating the ceiling of WiFi5 867. The space flow article Calculate the account. If any link is 100M, you are paying 100M to run a 100M network.

There is a more hidden layer: WiFi itself is a shortcoming. Even if you and your mobile phone are both WiFi 6, after negotiating the rate through a wall, the actual throughput of the 5G band is generally only 600 to 700 megabits. It is basically non-existent for gigabit broadband to be fully utilized on wireless devices. If you really want to feel the cool feeling of 122MB/s, you have to rely on network cables. This is why NAS players and downloaders end up punching a few more holes in the wall.

Therefore, before upgrading to Gigabit, you should first check out your home equipment, including old routers, old mobile phones, and old TVs. Upgrading to Gigabit will also give you money for the operator.

The third account: Advertisements only tell you about the downside, the upside is the hidden pit.

When the business hall promotes Gigabit, they only say "fast downloading" and never mention the uplink. There is a serious imbalance between upstream and downstream family broadband: The uplink of 100M package is usually 20 to 30M, and the 300M package is 30 to 50M. What about Gigabit? Most areas only have 30 to 50 MB, and some first-tier cities can reach 100 MB. In other words, if you upgrade to gigabit, downloads will triple, but uploads will basically stay the same.

And these things are all going well: Live broadcast (recommend 20 MB uplink for 1080P streaming), video chat with parents via WeChat, upload surveillance footage at home to the cloud, and drag files remotely to the NAS at home when outside ( Public network IP article I have talked about the remote path), and the mobile photo album has automatic synchronization with the network disk. The external network access of my NAS is stuck at around 4MB/s all year round. It is locked by the 30M uplink. It has nothing to do with Gigabit or not.

If you really have a need for big uplink, you can directly ask the business office if there is a special "big uplink" package or enterprise broadband, which is more suitable than using Gigabit without thinking.

My true feelings after using it: 100 liters 300 is a qualitative change, 300 liters Gigabit is close to no sense

Give a subjective conclusion: In the year when 100 liters was 300, the whole family never had a conversation like "Please pause for a moment while I look at the video card." This was a qualitative change. ; After 300 liters of Gigabit, except for the fact that it is faster for me to download large files in the middle of the night, and it is faster for me to copy things from my computer to the NAS using a wired connection ( The article on speeding up the intranet We talked about this topic before), and no one else in the family noticed that the broadband was changed.

To put it bluntly, the benefits of Gigabit are concentrated on two types of people.: People who often download large files, and players who have a NAS at home and multiple devices using a wired intranet. For ordinary families who watch videos, take online classes, and play games, there is a gap between 300 Mbit and Gigabit that you can't even perceive.

Take your seat: Choose according to this list and don’t waste your money.

What's going on with your family? Recommended gear Why
1-2 people, mainly watching videos on mobile phones, no 4K TV 100 trillion Concurrency during the evening peak is around 20MB, and the pool is more than enough.
Family of 3: 4K TV + online classes + videos for the elderly 300MB Concurrency is about 40 MB, leaving enough margin, the sweet spot
4K high bitrate video source + regular downloads + NAS players 500M or Gigabit First make up for the shortcomings in the equipment link before moving on.
To start a live broadcast or to connect to home devices remotely Keep an eye on the upside No matter how big the downlink is, it won’t help. Ask about the big uplink package.

Calculate the money again: Gigabit is two to three hundred yuan a year more expensive than 300M. It doesn’t look like much, but it can be a good router after three years. My suggestion is to install 300 MB first. After half a year, I found that it is not enough (the evening peak speed test has been running at the package value for a long time, and it is indeed stuck), and then it is not too late to increase it - upshifting is easy and downshifting is difficult, and the operator is eager for you to go all the way up. I’ve written down the tips on how to bargain when changing the package price. This article Here, the actual comparison of the three operators I have paid for is This article .

Give an order at the end: First, count the number of people in the family and what they are doing at the same time at eight o'clock in the evening, and then add the number of concurrent trillions. ; Check the specifications of the optical modem port, network cable, router, and mobile phone again ; The numbers on both sides are clear, and the answer will naturally be how many megabytes should be installed. After installation, press Speed ​​test troubleshooting article After running a speed test, I feel more confident.

Read More


Copyright Notice Scan to read on mobile
All Rights Reserved: 《SHUNOT》 => 《Whether to install 100M, 300M or Gigabit broadband, you won’t have to worry about it after calculating the three accounts.》
Article URL: https://www.shunot.com/en/zhonghe/911.html
Unless otherwise stated, all articles are original by 《SHUNOT》. Reposting is welcome! Please indicate the original URL when reposting, thank you.

Contact Us

Online Consultation: Click here to send me a message

WeChat ID: master_135

Scan to follow