Huawei optical cat opens telnet and registers super password
1. Login gateway for ordinary users:
http://192.168.1.1/login.cgi
2. Enter the URL to turn on telnet
http://192.168.1.1/enableTelnet.cgi
You can see the account and password, but there is no application button debug
console interrupts to line 194
if ( cUserName != 'useradmin' )
{
document.writeln("\n");
}
According to the code, you can see that as long as you assign any value to cUserName, it is not useradmin.
then set the interrupt on line 194, after setting the interrupt, refresh the page, enter useradmi="abc" in the Console to assign a value to the variable, and then you can see the application button. Remember the telnetadmin password, this is temporary and different each time.
3.telnet 192.168.1.1
telnetadmin
hhtxbyws
4. Enter the command to see the password:
telecomadmin get
output: passwd=Ba7yHaa1s9peUkq3
The password obtained is the temporary super administrator password of your optical cat this time
the registration is over, and the following are other commands
5.Other commands
enter the command to enter bash
ping 127.0.0.1 &ash
you can see the web page code
cat /webs/password.html__ HTML25__ package
tar -cvf /mnt/usb1_1/web.tar /web
The following is a record, register for use later:
----------- 1. Get password--------------
pwdAdmin = '<%ejGet(adminPassword)%>';
pwdSupport = '<%ejGet(sptPassword)%>';
pwdUser = '<%ejGet(usrPassword)%>';
-----------2. Remove the wifi name at the beginning of chinanet--------------
modify the wifi name, remove the annoying chianet, the method is the same as step 2 above, F12 check the setting wifi page code, find the verified js code, set the interrupt, set the wifi name, interrupt, modify the quantity name, skip the verification, and then change it to the name you want.
