Message board

Author:SHUNOT• Published on:2023-08-26• Category:Uncategorized• Comments: ( 226 )

blog is built on personal interests. Collected and summarized wireless router settings__ HTML21__， Wireless Routing Lightcat __ HTML41__, Lightcat, 192.168.1.1_HTML55____ HTML56__ Some experience in basic knowledge fault handling, I hope it will be helpful to everyone!

Spam comments are not welcome on this blog, please do not vent here! Frequent comments are automatically blacklisted. healthy and meaningful comments and comments, I will take the time to reply ! If you want to see a reply as soon as possible, you can fill in your email address when commenting and commenting, and my reply will be sent to your email!

Comment List

Season 4Reply

#28

I use Telecom RG200o-ca optical cat, and now there is a problem, I need to do a virtual server, I need to do peanut shell and port mapping, obviously Telecom optical cat can not meet my requirements, before I turned off the optical cat route, using my own TP route, but it didn't work, and the domain name PING was not working for a long time. Peanut shell gave the conclusion that my port was not mapped well, the gateway did not work, etc., I came to ask for advice, can you add me to QQ61808900 talk, thank you

2012-07-03 04:23

@Season 4: You need to test whether your entire network is working first.

2012-07-04 00:12

Season 4Reply

@Bing Ling: The network is normal, and I have successfully accessed the Internet with my own route, it was like this before, I asked someone to crack the route on Taobao, he used a user and password called telecomadmin software to break it, after logging in, change the bridge mode to close the route, and then create a new 8. Let me change the routing gateway to be different from the optical cat, I change the routing IP to 192.168.2.1. My computer IP was changed to 192.168.2.3 to access the Internet. The server that needs to be mapped has also been changed to 192.168.2.4, and there is also an 8000 on the corresponding port 90 opened on the mapping side. Now the problem is that you can use the route to access the Internet, that is, the port is not passable, and the external network cannot be accessed.

2012-07-08 01:59

Season 4Reply

@Season 4: Can You Contact Me? WeChat mobile 13706067636

2012-07-08 06:20

adminReply

#27

About Wireless Optical Cat Wireless Routing Disconnection Usage Experience. After many tests came up with the result or the laptop wireless card driver mismatched. I am an IBM notebook driver downloaded from Lenovo's official website or not. Finally, find the manufacturer of the wireless network card and get the corresponding driver version from the manufacturer's driver. Now everything is fine. The packet loss rate is 0, you can refer to it.

2012-06-26 23:34

Three watersReply

#26

I am now using the ZTE ZXV10 W300D V2.0 version of the optical cat sent by telecom. How to crack (to be able to access IPTV)? And after cracking, plus a one-person D-Link DI-504 router, how to set up to ensure that multiple computers can access the Internet at the same time? Sorry, I'm a novice router, thank you for your advice.

2012-06-21 16:42

@Sanshui: If you don't open IPTV, there is no way. The plus route is the same as the original ordinary cat plus route, and the general limit of the light cat is 4 people at the same time, which should be enough.

2012-06-21 17:47

inactionReply

#25

When I used the super password to change the settings in ZTE H108L, the password was changed remotely by the telecom, who can do it? The internet is so slow right now

2012-06-19 11:38

@Wuwei: Log in with an ordinary user, record the relevant settings, and then reset the optical cat, so that the password is restored. Then reconfigure.

2012-06-20 01:32

Silence is like goldReply

#24

How to hack Shanghai Bell I-240W-Q optical cat to get a superuser account and password. Because if it is not automatically connected, my Internet TV cannot access the Internet. Thank you for your advice!

2012-06-11 00:58

@Silence like gold: I'm sorry, I can't do anything now, I don't have any device research now, and I haven't collected relevant information on the Internet, so I can only try the universal password username: telecomadmin 密码：nE7jA%5m，祝你好运！

2012-06-11 18:22

Silence is like goldReply

@Bing Ling: It's a bit of a pity。。。。。。 This is not good. Damn telecommunications...

2012-06-14 07:13

Router settingsReply

#23

Exchange links

2012-05-21 04:48

flyReply

#22

Hello, I have a problem here, there is no value behind the connection name of ZTE ZXA10 F460 V3.0 optical cat INTERNET_B_VID what should I do, I don't know the VLAN ID, I can't crack it, solve it, thank you in advance

2012-05-06 04:05

@Fei: As long as it is multicast VLAN ID, it will do

2012-05-06 04:11

flyReply

@Bingling: If the VLANs of several others IDs are 43, 45, and 46, how much should I lose when creating a new WAN connection?

2012-05-06 04:53

flyReply

@Fly: How do I check the Multicast VLAN ID?

2012-05-06 05:54

Ice

@Fei: The original dialing mode exists

2012-05-06 06:04

fly

@Fei: I don't understand it, please give me more advice

2012-05-06 17:51

Ice

@Fei: I'm sorry that ZTE didn't have a multicast VLAN ID, to check the VLAN ID, you can look at the VLAN ID in your original bridge mode or call the local 10000 to inquire about the local VLAN ID

2012-05-06 18:29

@Fly: If the VLAN is in the original bridge mode, select untag mode there, select untag mode in the new PPOE dial mode, and select untag mode there.

2012-05-13 19:01

Si YingxueReply

#21

The cat that uses it after turning off the route is also disconnected from the Internet, which should be a problem set when turning on the route and wireless, right?

2012-05-03 18:27

@Si Yingxue: It has nothing to do with the wired and wireless settings you use, if you connect each computer separately, try to restore the settings of the optical cat and use the dial-up mode to see if the connection is disconnected. If you return it, you have to contact the operator for maintenance. The easiest way is to contact the operator directly for maintenance, thinking that many of these problems are equipment problems or wiring problems.

2012-05-03 18:52

Si YingxueReply

@Bing Ling: Okay, thank you~~~~ Call 10,000 Dumu people to pick up 555... It's so tragic~

2012-05-03 19:21

@Si Yingxue: Hit a few more times!

2012-05-03 19:23

Si YingxueReply

#20

Xin'an's optical fiber 4M, the optical cat of the Bell i-240w-q, yesterday asked others to help crack the routing function, now a desktop, a notebook are all wired Internet, all disconnected, the frequency is very dense, QQ drops in a few seconds, and then automatically logs in, with 360 test network speed to show that there are more than 400K downloaded, but the download is not so fast. What is the reason? Thank you so much~~

2012-05-03 00:46

@Si Yingxue: Did there be such a problem before the route was opened? Your problem may be that the fiber optic line is not working properly, and see if the remaining fiber is bent too much. If everything is normal, try to restore the settings to see if there is a wire in dial mode, if it does not drop, then it means that there is a problem after opening the route, check whether there is a problem with the open routing setting. There is a big difference between testing software and real downloading, which mainly depends on the speed of the download server!

2012-05-03 01:58

Si YingxueReply

@Bing Ling: We have our own router outside, could it be a router problem? We have used that route before, and it is easy to use. Today's web page is so slow to open~~~ Before opening the route, a computer can access the Internet, it is normal, when it is first opened, it is afternoon, and the Internet is also normal in the afternoon, but it is not possible at night, both computers are disconnected, QQ logs in again in a few seconds~

2012-05-03 17:00

@Si Yingxue: I took a route behind the light cat, tried to restart the device, and used one to surf the Internet to see if it was normal and tried to kill the virus.

2012-05-03 17:25

Monkey brotherReply

#19

Hello! I use Huawei's HG8240, I want to connect directly to two computers to access the Internet, follow the prompts on the Internet, it is not easy to use, after dialing one, the other cannot be accessed, error code 691 I also have a Huawei switch in my hand, how can I set up two computers to access the Internet at the same time? Thank you so much!

2012-05-01 20:54

@猴哥: Hello! You can refer to the route setting mode of the HG8245. https://www.shunot.com/?post=14 See if it helps you. Change your hg8240 bridge mode to PPOE auto-dialing.

2012-05-01 21:07

@Brother Monkey: If you use a switch, you can also realize the sharing of several computers on the Internet. Connection method Connect the cat and both computers to the switch, and share the broadband connection on the computer you want to be the host. The two computers share Internet settings through the switch, 1. Host settings, host IP setting method for dial-up Internet access: see the local connection in the network connection, click the right health selection attribute, click the Internet protocol (ICP/IP) attribute, and choose to use the following IP address: IP address filling: 192.168.0.1, subnet mask: 255.255.255.0, gateway and dns host can be filled in without filling. Then right-click on the broadband connection and select Properties - Advanced: will allow other network users to connect through this computer's Internet connection before checking the box. 2. Other computer settings, other machines also use the local connection attribute of the right key point in the network connection, click the Internet protocol (ICP/IP) attribute, and use the following IP address: IP address filling: 192.168.0.X, X is any number greater than 2 and less than 254. Subnet mask: 255.255.255.0, default gateway: 192.168.0.1, preferred DNS server: 192.168.0.1 or local telecom DNS point determined

2012-05-01 21:13

HG8245 depressed~Reply

#18

Ask Bingling for help, I have a telecom HG8245, how do I want to limit the network speed of another computer now?

2012-04-25 09:01

@HG8245 is depressed~: You install a P2P terminator on your computer

2012-04-25 17:56

#17

Today, the blog was attacked, the bandwidth was not large, so the blog access was slower, sometimes I couldn't access it at all, I couldn't log in at all, and now I finally returned to normal, and I actually found that someone left a message saying that I attacked his website, saying that I added the website to his website, I don't know what the website of this brother is. What is the BR PR value?

2012-04-24 02:41

victimReply

#16

Why do you always attack my website! Links to your website are always added to my website inexplicably!!

2012-04-24 00:32

@Victim: Please find out why! I don't explain too much about some things. You may also find that my blog today is slow to respond and can't be opened!

2012-04-24 02:27

HzReply

#15

My computer still needs to dial after turning on, is it not set up for automatic boarding? Is the automatic logging setting you mentioned automatically connecting to the network cable without any other operation to start the computer?

2012-04-15 19:41

@Hz: You want to enter your Shanghai Bell I-240W-Q to set up auto-dialing. If you don't set it up, you have to use the corresponding dialing software on your mobile phone to dial.

2012-04-15 20:18

HzReply

#14

The optical cat model installed with telecom is Shanghai Bell I-240W-Q The mobile phone can receive 5 grids of signal, but it is a prompt to use the mobile phone to access the Internet: WIFI Status: Turned on Default Gateway: 10.0.0.172:80 Access point name: Not set Use Gateway: Not set

2012-04-15 09:08

@Hz: First you need to make sure that your routing optical cat's wireless is set up and is already in auto-dialing mode.

2012-04-15 18:59

« 1 2 3 4 5 6 7 »

Contact Us

Online Consultation:

WeChat ID: master_135

Scan to follow