My cousin bought a WiFi7 router from overseas. I can’t find a single 6GHz signal in the country.
It all started with a phone call from my cousin. Last month, he asked a friend who was on a business trip to bring back a WiFi7 router from overseas, an ASUS RT-BE96U, which cost a little less than 2,000. The reason why he bought it was very straightforward.: The overseas version supports the 6GHz frequency band and is equipped with a bandwidth of 320MHz. The parameter page states that the theoretical speed can reach tens of gigabit, which is much better than the BE3600 from the National Bank. The result was a weekend of hard work. The phone was placed half a meter in front of the router. Looking through the WiFi list, there were only two signals, 2.4G and 5G, and no trace of 6GHz. He called me and asked me if the router was broken. I said don't move yet. The machine is most likely not broken. The reason is that the 6GHz frequency band is not open to WiFi in China.
After hanging up the phone, I went through the matter from beginning to end myself, read the frequency allocation regulations of the Ministry of Industry and Information Technology, and checked against the National Bank router. Conclusion first: As of now, there are still two WiFi frequency bands that can be legally used in China: 2.4GHz and 5GHz. 6GHz is not allocated to civilian WiFi. , the 6GHz radio frequency on the parallel import router is a piece of hardware that is powered but not allowed to work. My cousin's two thousand yuan, the premium part basically bought things he couldn't use. This article explains clearly the pitfalls he has stepped into and the spectrum rules behind them. Those who want to buy WiFi7 overseas should read it before paying for it.
Let’s first explain clearly what resource 6GHz is.
Many people regard "WiFi7" and "6GHz" as the same thing, but they are not. WiFi7 is a technical standard, whose scientific name is 802.11be. It focuses on how to transmit data faster. ; The frequency band is a lane, and it controls where the data runs. WiFi7 can run on three frequency bands: 2.4G, 5G, and 6GHz. The first two are old lanes, and 6GHz is newly built.
What’s so great about the new driveway? Width. The 6GHz frequency band is from 5925 to 7125MHz, and the entire section is as wide as 1200MHz. There are basically no old residents such as Bluetooth and microwave ovens in the middle to compete for the channel, which can create a clean and wide channel. The most powerful 320MHz bandwidth in WiFi7 promotion refers to occupying eight lanes at a time on this new lane. The entire 5GHz segment has a total of about 500 MHz available, and it has to be shared with radar and satellite services. Adding a 160MHz is already the limit. Therefore, the main premise of the "WiFi 7 speed is doubled" is based on the availability of 6GHz - this is true in many overseas countries, but not in China. I have made an account of the frequency band and bandwidth before. Bandwidth 20/40/80/160MHz article I have calculated it once before, and this time I added the 6GHz section, and the account is clearer.
Frequency band ownership: The upper 700MHz is given to 5G and 6G
Verification of this matter will have to start in 2023. The new version of the "Radio Frequency Allocation Regulations" that came into effect on July 1 of that year allocated the upper section of the 6GHz frequency band, 700MHz from 6425 to 7125MHz, to the International Mobile Communications System, which is 5G and future 6G. WiFi uses license-free spectrum, which is in the same camp as mobile communications. This 700MHz has nothing to do with WiFi at its root.
The remaining low-band 500MHz from 5925 to 6425MHz is still unclear as to its ownership. There are roughly two factions in the world: The United States simply opened the entire 1200MHz band to WiFi ; The European Union, Japan, and Australia only open the low-band 500MHz. No section of our country is currently open to WiFi - the high section has been reserved for mobile communications, and the low section is still to be determined. Therefore, for routers on the domestic market, whether it is a Mercury priced at RMB 300 or a flagship priced at RMB 2,000, the "working frequency band" column in the parameter table all lists 2.4GHz and 5GHz, and no one dares to write 6GHz. This is because radio equipment must have model approval for domestic sales, and even if it is not approved, it is a violation. How to read the standard serial number of WiFi7? I am The real name of WiFi6 is 802.11ax I have dismantled it, and this time I looked at the frequency band column, and I finally understood the last column of the parameter table.
I got a parallel import router, what can I actually use it for?
My cousin’s BE96U has a 6GHz radio frequency, antenna, and power amplifier in the hardware, and there is also a 6GHz switch in the firmware. But when it is turned on in the country, can't it send out a single 6GHz signal? In fact, it's the other way around - it can't even reach the step of "sending a signal", because there are no legal channels available on your mobile phone that can receive 6GHz. In the area codes of routers in various countries, the 6GHz channel table for mainland China (code CN) is empty. It's like a multi-standard radio. The band knob is turned to shortwave, but the shortwave band where you are is not allocated any broadcast service. When the knob is turned, there is only a quiet dial.
Therefore, the real capabilities of parallel-imported WiFi7 in China are not fundamentally different from the dual-band WiFi7 of the National Bank.: Both are 2.4G plus 5G, with a maximum bandwidth of 160MHz on 5G. For the extra money my cousin spent, the 6GHz radio frequency part is equivalent to full sleep. What’s interesting is that WiFi7 has really improved in dual-band – 4096-QAM squeezes more data into each symbol, and MLO can twist 2.4G and 5G links together. My actual analysis of the effective scenarios of MLO is written in MLO actual test article inside. But if you want to double the theoretical speed, you have to have 6GHz+320MHz. Bank of China parallel imports are on the same starting line on this line. Is it worth the money to change the phone? I’m not sure. The account of WiFi6 and WiFi7 I have calculated the conclusion: For Gigabit broadband homes, the improvement of dual-band WiFi7 is limited.
Four questions surrounding this machine, answered one by one
My cousin then asked a few more questions. I think people who want to do overseas shopping will ask them, so I will write them here.
| question | Answer | in accordance with |
|---|---|---|
| Can 6GHz be forcibly turned on in the country? | No, the 6GHz channel table under the CN area code is empty and there are no options in the firmware. | The model has not been approved, and the router firmware is locked according to the region code. |
| Is it possible to flash third-party firmware to unlock the ban? | In theory, the area code can be changed, but it is transmitting on an unlicensed spectrum, which is illegal and interferes with 5G/6G services. | Radio Frequency Allocation Regulations |
| Is it useful if a mobile phone supports 6GHz? | It’s useless. Both ends are indispensable. Both the router and the mobile phone must have legal channels on 6GHz. | Spectrum ownership is uncertain |
| Will it be opened in the future? | The ownership of the low-band 500MHz has not yet been determined. Once it is opened, it will only be enough for one 320MHz channel. | Refer to EU zoning law |
The third question deserves a few words. My cousin's mobile phone is an overseas version, and the parameter page says it supports 6GHz. He always thought that "the mobile phone is connected, but the router is missing." That's not the way to calculate it - the opening of frequency bands is a matter of regional level. A device supporting a certain frequency band only means that the hardware capability has arrived. Whether it can be used depends on whether it is approved by the local radio management. This is just like a mobile phone that supports 5G in a certain frequency band arriving in a country where that frequency band is not deployed. The hardware is there but the network is not there, which means there is no such thing.
Let him know the accounts of Haitao, and also let others after you know it.
What to do with the BE96U in the end? My advice to my cousin is to keep it for future use, but don’t treat it as a treasure of “Super National Travel”. Its 5G part is on the same level as the flagship of the Bank of China. The 2.5G network port and USB port are all useful to it, but the premium of 2,000 yuan paid for 6GHz cannot be recovered in the short term. If he had asked me back then, I would probably have asked him to look at the BE3600 range of the National Bank - how to choose the version, which one is reduced and which value is better? There is already a ready-made analysis on the site. The four versions of BE3600 and BE6500 comparison article Here, for around 300 yuan, you can use all the features of dual-band WiFi7.
Who should consider overseas shopping? After thinking about it, there is only one way: I travel both at home and abroad all year round. When I go back, 6GHz is available there, and I use it as dual-band here. In addition, for normal domestic use, the only additional benefit of overseas shopping is "the parameters are good-looking". The logic of the price difference here is exactly the same as the time when I chose the e-sports router for him - the price difference of 599 and 249 was divided into three accounts, and then I knew whether it was worth it or not. The analysis of that time is in The article about three accounts of e-sports routing price difference , this time just put the "frequency band" into the same account. As for those with a tighter budget, the ZTE Xantian Qingyun Edition in the 200 yuan range comes with a 2.5G port, that article Xuntianqingyun version The conclusion is still working out.
There was another trap that he almost stepped on, by the way.: The power adapter plug of overseas shopping routers is American and European standards. Some of the transformer input voltages are only 100-120V. If plugged directly into a domestic 220V socket, the machine may burn. His unit has a wide voltage of 100-240V and is fine. You must read this small print before buying it.
Buying a WiFi7 router is the current choice in China
Gather the conclusions into a few practical points:
- Just look for "National Bank Dual Band": 2.4G+5G, 5G maximum 160MHz, this is the current ceiling in China, and it is the same for everyone.
- The promotional page says "tri-band" and "6GHz" are overseas versions. The extra section is not used in China, so the premium is not included.
- For households with below gigabit broadband, the improvement from WiFi6 to dual-band WiFi7 is gradual. Don’t pay twice as much just for the number “7”.
- I really want to see if the 5G frequency band at home is crowded now. I first go to the background to count the channels and the number of neighbors, and then decide whether to change. How do I check it? BSS color article There are ready-made methods in this article. The cost of the channel being occupied by neighbors is more detailed than mine.
If the low-band 500MHz is really allocated to WiFi, the situation will change, but at least it will have to wait until the policy is implemented and corresponding new models of routers and mobile phones are released. According to the speed of communication equipment upgrading, it will be another replacement cycle. My cousin's machine is running dual-band in his living room, so it's not a loss - it's just that every time I see the unused "6GHz" on the parameter page, I think it's a spectrum lesson bought for 2,000 yuan.
