-
The PON light of optical modem flashes and cannot be registered. The LOS does not light up and is red. Check the four stuck points according to the probability.
The optical modem's PON light keeps flashing slowly and can't connect to the internet, but LOS doesn't turn red, indicating the fiber optic has light and is stuck at the registration and authentication stage. Waiting for enough time, light decay wiring, authentication data, and four checkpoints on the server room side were arranged according to probability. My assistant checked until midnight....
-
6 cameras were plugged into the NAS and used as a video recorder. If the address was copied to the wrong address, the recording would be wasted overnight.
If you already have a NAS at home, why not buy a ready-made video recorder? I stuffed all six cameras into Feiniu's monitoring center. ONVIF automatically added only half of them, and the remaining RTSP addresses were miscopied, and the recording was completely empty overnight. 4. Brand address format comparison table and synology authorization code—calculate everything for you at once....
-
I used a detector to measure the radiation of the router. It can be placed beside the bed in the bedroom, but it is not the one that should be moved away.
Does the router emit a lot of radiation? Can it fit in the bedroom? My cousin was preparing for pregnancy and wanted to throw away the router at home. I borrowed an electromagnetic radiation detector and tested it: the device was close to 9 microwatts, and even the instrument over one meter was fast and unstable, far below the national standard limit. The real thing right next to the person is the phone, and putting the router in the cabinet only makes the phone work even harder. Let's clarify the issue of radiation at home all at once....
-
The Xiaomi router Mesh network was not released before it was sold second-hand. A colleague said the machine was broken.
Before selling the Xiaomi router Mesh sub-router as a second-hand tool, you must first unconnect it; otherwise, buyers won't be able to access the backend after getting it, and it will look like a broken machine. I've gone through both deleting nodes and resetting each one. This article covers the status after deletion and the three aftermath matters....
-
There is total rotation buffering when watching 4K on TV. If you replace the three connection methods, WiFi is not as good as network cable.
When watching 4K on TV, the buffer keeps spinning. I blamed broadband first, then the router. After fiddling with WiFi and plugging in the network cable, I realized the TV's port only gave 100Mbps. Here are all the real-world test data for the three connection methods. After reading, you'll know whether your home should be plugged in or connected to WiFi....
-
The surveillance video uses a 2TB hard drive. It was promised to be stored for three months, but the continuous recording is gone after a week.
How long surveillance footage can be stored depends on the number of bits, number of channels, and recording method. My home has six cameras with 2TB hard drives, recording continuously at 260GB per day, and after seven days, it starts cycling over the old ones. This article explains the method for calculating the number of days saved, then thoroughly explains the three knobs that extend save time—streaming, enabling detection, and adding a split header strategy—and also covers the pitfalls of disconnecting or resuming data and misaligned timestamps....
-
Lao Qunhui moved to my mother's house, and rsync provided off-site backup for two NAS
Two NAS units in one room, and if a fire breaks out, the thief is gone. I moved my old Synology DS220j to my mom's house for remote backup. After going through the whole process of public IP integration, SSH password-free access, and rsync scheduled synchronization, I almost got the backup deleted by --delete. All the pitfalls have been arranged for you....
-
I reaped all the benefits of converting optical modem to a bridge, but the cost was also the loss of three families.
Switching from optical modem to bridge isn't something everyone should do. I went through all the benefits (public IP remote connection to NAS, port forwarding requires one less layer) and costs (IPTV black screen, ITMS pushed back at midnight, can't access the backend). Four types of people should ignore three types of people to avoid them. Here's the step-by-step order at the end of the article....
-
I delayed updating the NAS system for three months before clicking it, but my colleague accidentally clicked it and it turned into a brick.
A NAS system update prompt pops up—don't rush to click confirm. You need to upgrade for minor patches, wait for major versions, and basically can't upgrade against Synology. I'll use my upgrade experiences with both Feiniu and Synology machines to explain the three things before upgrading and the self-rescue after failure....
-
I always can't get online when I fill in the IP manually. 90% of the time it's because the gateway field is filled in incorrectly.
I manually set a fixed IP for the Feiniu NAS, leaving the gateway field blank. As a result, the computer connected to the NAS and everything worked fine, but qBittorrent and Docker couldn't connect to the external network. If the internal or external network disconnects this issue, 90% of the time it's due to the gateway filling in the error or not filling it out. This article explains what each of the four boxes—gateway, IP, subnet mask, and DNS—governs....

