Home • Router settings - Page 3
-
What should I do if I can't open or enter Xiaomi router 192.168.31.1? I helped the three families check and found ninety percent of them stuck in the first two steps
Xiaomi router 192.168.31.1 cannot be opened or accessed in the background, so don't rush to reset it yet. After helping the three families check and summarize the order: first check whose WiFi you're connected to, then check if the gateway address has changed. In trunk mode, 31.1 drifts to another network, and the real connection is the gateway in the mobile WiFi details....
-
How is Xiaomi AX3000T and is it easy to use? After using it for two years, to be honest, the new version secretly swapped chips to check the SN code first
My Xiaomi AX3000T has been used as the main router for two years: 62 devices can run smoothly, Mesh networking is stable, 189 yuan worth the cost, but I've encountered both heat generation and dual-band integration pitfalls. Now the new version secretly switches to a Qualcomm chip, so check the SN code before placing an order....
-
How to connect a Xiaomi router to an IPTV set-top box? There's an IPTV switch hidden in the advanced settings, which I found only after scrolling to the third menu
How to connect a Xiaomi router to an IPTV set-top box? After switching to optical modem bridge, the TV goes black and the set-top box plugged into the router's LAN port has no signal—actually, this is because the IPTV setup is missing. The new Xiaomi router has an IPTV switch hidden in the advanced settings at 192.168.31.1. If you select the correct mode and enter your VLAN ID, you can recover it. The older model doesn't have this option, but there are three alternative options. This article explains wiring, settings, and three pitfalls all at once....
-
Can you use a phone charger if you lose your Xiaomi router power adapter? AX3000T it's 12V, not 5V—I almost threw away a good machine
Mainstream models like Xiaomi Router AX3000T, AX3600, and AC2100 all use 12V power supplies, while phone chargers only have 5V. If you plug them in and can't light up, you might think the device is broken. This article explains how to assess voltage, three legitimate alternative routes, and the three essential checkpoints for power distribution....
-
How to change DNS on a Xiaomi router? It's normal not to be able to find it in the Mijia app; after filling two panels in the 31.1 backend, you can avoid three pitfalls
Changing DNS on a Xiaomi router can only be done in the web backend; it's normal that you can't find it in the Mijia app. 31.1 Go to Common Settings and Internet Settings, fill in 223.5.5.5 and 119.29.29.29 in the two boxes, save and restart to finish. Most of the issues that don't take effect after fixing are cached, not restarting, and IPv6 taking a wrong turn—I've gone through them one by one....
-
What's in the Mijia App router toolbox? I went through a dozen tools one by one; out of five, I used them and three were just decorations
The router toolbox in the Mijia app hides a row of great things: anti-internet notifications, WiFi treasure chest, remote restart, child control, and guest WiFi. I went through more than a dozen tools one by one, explaining which ones I use every day and which are just for show—in one article....
-
What does the color of the Xiaomi router indicator light mean? The orange light flashes, the yellow light stays on, and the blue light flashes—one watch to understand whether to panic
What do the blue and orange lights and yellow lights mean for Xiaomi routers? The orange light stays on means the upstream network is down, the yellow light flashing slowly means the system won't start, and the blue light flashing means there is new firmware. I organized the light signals of the AX3000T and AC2100 generations into a table, posted it on the weak current box for a year, and just glanced at it at midnight to know if to get up....
-
How do you enable IPv6 on a Xiaomi router? 192.168.31.1 only has one switch, but I've stepped on all three pitfalls for you
Enabling IPv6 on a Xiaomi router is just a matter of switching it on and off in the internet settings under 192.168.31.1 Common Settings. But after I started it, I realized NAT6 is a fake public network, firewalls block incoming sites, and the optical modem even swallows V6. These three pitfalls are explained all at once. If you want to connect remotely to a NAS, read this article first....
-
How to restore a Xiaomi router to factory settings? Hold the pin for 5 seconds and the light turns orange. If you're selling second-hand, don't rush to reset it yet
There are two ways to restore a Xiaomi router to factory settings: enter 192.168.31.1 and click on the backend, or hold the SIM ejector against the reset button for 5 seconds and wait for the light to turn orange. Before restoring, remember to write down your broadband account and WiFi password. For second-hand ones, you need to unbind and reset them at Mijia. If you reverse, you'll end up with a tail....
-
How to check who is freeloading on a Xiaomi router? A new device notification popped up in the Mi Home app, and I pulled out an unfamiliar phone
It's not hard to check for WiFi on a Xiaomi router. The 192.168.31.1 homepage has a device list, and the Mi Home app also provides new device access reminders. Three tricks to recognize unfamiliar devices, the difference between banning internet access and blacklisting, and the pitfalls of random MACs accidentally hit by whitelist—I tested them AX3000T and just clicked them accordingly....
