Home • All articles published on 2026 Year 09 Month - Page 10
-
How do you set up WiFi timer on a Tenda router? At 11:30 PM, the internet was automatically disconnected. On the very first night, I took all the cameras offline
To avoid using my phone late at night, I set the Tenda router to automatically turn off WiFi at 23:30, and it was set up in just two steps tendawifi.com. The first night, all three cameras went offline together, and one still hadn't recovered until morning. This article covers the remedies and temporary internet access during outages....
-
What should be inspected on the day of telecom broadband installation? The driver said if you can get online, you want to leave. After testing these five things, you can let him go
After installing broadband, the technician said he could get internet and left. I stopped him and tested five things on the spot: plugging in the network cable for speed tests, entering 192.168.2.1 to copy the light degradation baseline, changing the default password, adding IPTV to the list to watch live streams, and taking stickers to copy broadband accounts and LOID. If the light degradation card is critical, rework will be done on the spot. These bases will be useful for future repair requests....
-
Don't delete the NAS storage pool carelessly: I went through a 4TB Feiniu and found that all five places have taken up the space
When the NAS storage pool is full, settle the score before acting. My 4TB Feiniu only had 11GB left to alarm the alarm. From Btrfs snapshots, recycle bins, Docker logs, to old downloads, I cleaned them one by one, recovered 400GB, and found everything that could be deleted and which ones to ignore....
-
What happens if the router reaches full connections? The night I logged into BT, the webpage couldn't open at all. I've figured out the NAT session list account
On the third day of using BT for protection, WeChat messages at home were still being received, web pages couldn't be opened, and restarting the router immediately revived it, but the next day it happened again at the same time. After checking, it wasn't broadband or WiFi, but the router's NAT session table was filled with connection counts. Three symptom characteristics, two viewing paths, four handling tips—this article clearly calculates the number of connections....
-
Is it difficult to flash OpenWrt AX3000T Xiaomi router? By following these six steps, if the flash breaks, you can always return to the official post
Xiaomi AX3000T flashing OpenWrt actually involves six steps: update the version, back up all files, flash Breed, enter Breed, flash ImmortalWrt, and keep a backup plan for the official release. I've run through my old V1 from scratch, including real-world speed and heat test numbers, and who should avoid using it—all explained in one article....
-
Home surveillance cameras can't be seen when you go out, or apps keep spinning? After five layers of investigation, the most unfortunate was the last one
The surveillance is fine at home, but the app spins around once you step outside? Spinning around, offline, and stuck in a PPT are three main issues: device disconnection, phone misunderstandings, insufficient uplink bandwidth, failed hole drilling with relay, and vendor cloud leaks—five layers of troubleshooting are listed one by one. After checking, I found that half of the problems aren't even at home....
-
Where can I check the router model and hardware version? Three paths: sticker, backend, and app—I only learned to code first after installing the wrong firmware
Where can I check the router model and hardware version? I've tried all three methods: checking back stickers, logging into the 192.168.1.1 backend, and checking the app. Downloading firmware and misreading hardware versions can cause bricking. Buying power supplies, reporting for sale, and buying second-hand all rely on these three codes. Find everything at once, don't climb the ladder twice....
-
How to change the LAN port IP of a Tenda router? Both versions have conflicts with 192.168.0.1, and after I changed them, I found the IP changes on its own
My cousin's Mercury main router uses Gatenda AC10 as the AP, both 192.168.0.1 are in conflict, with the backend switching between one and the other. I wrote down the entire process of converting Tengda to 0.2, and also clarified the two paths of the new and old interfaces, as well as the WISP pitfall where the IP itself changed....
-
How do you cancel and disassemble a phone when Telecom broadband is no longer working? The optical modem and set-top box had to be returned, so I accompanied my mother-in-law to finish the process and finally settle the accounts
If you don't need telecom broadband, don't just throw away the optical modem. If you cancel the device, you have to return the device, and if it's missing, you will be compensated at the purchase price. I accompanied my mother-in-law to handle everything, and everything was explained in one place: contract penalty, downtime and account retention, equipment list, and balance refund....
-
How to recover accidentally deleted files on a NAS? Don't panic if the recycle bin is empty—I've personally tested and found the path to snapshots
Last year, I deleted my wife's phone photos from half a year as duplicate catalogs, and that night I even emptied the recycle bin, only realizing it the next day. I managed to get the whole bag back thanks to Btrfs snapshots. Two rescue routes for NAS accidentally deleted files, plus ext4 users' escape routes—this article explains everything clearly....
