Home • All articles published on 2026 Year 10 Month - Page 14
-
In winter, smart doorbells lose 20% battery every three days, then reheat and bounce back—don't rush to replace the battery
During the first week of the cold snap, my doorbell's battery dropped from 58% to 38%, and I almost ordered a new battery. Later, I found that at low temperatures, half of the lithium battery actually degrades, and the other half is apparent drops that rebound. The principle behind the phone's automatic shutdown outdoors in winter is the same. Using a button battery thermometer works fine. This article explains the principle and winter strategies in one detail....
-
If you want to change the optical modem bridge back, delete the Bridge section; the router is 90% flawed at this step
If you regret switching to the optical modem and want to switch back to routing mode, just go to the WAN connection and delete the bridge you built. If the original pass was passively changed, rebuild the route. The easiest way is to restore the factory and have ITMS reinstall the official configuration. Remember to switch the router back to automatic PPPoE; if you don't change it, it's a wasted change....
-
Transferring files from computers to NAS relies entirely on SMB; Microsoft personally disabolished SMB1
Computers connect to NAS to map network drives, TVs play movies directly from the NAS, printers plugged into NAS for family use, all backed by the SMB protocol. I have sorted through its third-generation version, the past of SMB1 being ruined by WannaCry, and why the 445 port can't get out—all in one go. If you can't connect to NAS sharing, read this article first before you act....
-
Synology kit center won't open, four root causes checked in order, DSM6 is mostly stuck last
My cousin's old DSM6.2 third-party package was installed, and the kit center rotated and the community source showed invalid locations. I checked the system time from NAS in-house and finally found the real culprit on the root certificate. The four root causes are listed in order, with the old machine stuck at the end. This article explains the diagnostic sequence and the judgment methods for each step....
-
If you want to avoid mistakes when switching Unicom optical modem to bridge, don't delete the original or add a single one, and keep all the TV landline intact
The biggest failure when Unicom optical modem switches to bridge isn't losing the super password, but deleting and rebuilding the original WAN. I helped a colleague clean up the mess before I figured it out: add a bridge, the original cable doesn't touch a finger, the TV landline keeps running, and the router still dials up to get a public IP. This semi-bridge setup is copied step by step for you....
-
186GB file transfer to NAS test: Four wireless channels are five times slower and even disconnects twice
After transferring 186GB files from the computer to the NAS, I ran through four routes: wireless, gigabit cable, 2.5G, and external hard drive transfer: wireless took two and a half hours before disconnecting, network cable took 29 minutes, and the fastest took 11 minutes. Includes the robocopy multithreaded command and a four-path mapping table....
-
If the smart lock alarm notification isn't received but the lock isn't broken, it's probably broken on the phone's four switches
During the days my wife took the child back to her parents' home, three fingerprint try-and-error alerts appeared in the door lock app log, but my phone didn't ring at all. After checking the door lock and reaching the notification bar, I finally understood: the lock was working fine, but what was stuck was Mijia's message switch and Android's power-saving strategy. The locations and troubleshooting sequence of the four switches are explained clearly in this article....
-
Xiaomi router firmware downgrade: upgrade disconnect and rollback refused, so use official tools to flash it back
My mom's house AX3000T the firmware was automatically upgraded in the early morning. In the morning, the speaker cameras were all offline. I wanted to revert to the old version and the webpage prompt saying it couldn't be lower than the current version. In the end, I used the official repair tool and the network cable to flash it back in five steps. Before downgrading, clear configurations, disable auto-upgrades, and recognize version settings—these three matters need to be calculated clearly....
-
Forgot the Tenda router WiFi password, first go through the login box, then check the dual-band and check the two screens
Don't forget the Tenda router WiFi password just because you're looking for the installation order—just tendawifi.com into wireless settings and you can view it. The mobile app is faster in three steps. The premise is to get past the login box first. The login password and WiFi password are two different things. Don't miss the dual-band separate machine and the two passwords....
-
If a router blocks a device, it has a blacklist and whitelist and kicks down the third level; if you make a mistake, you can recover it
My mother-in-law's phone connected to my WiFi, and although the password was correct, she couldn't get through. After a long struggle, I realized it was because I accidentally blocked her and used the device the night before to use the internet. This article explains the differences between the three levels—kicking offline, blacklisting, and whitelisting—as well as the entry points and methods for removing blacklists from each brand. If you make a mistake, just follow the instructions to get them back....

