Home • Comprehensive classification > NAS - Page 7

Just got your hands on the Synology DS220+ and ready to build your own private cloud storage? Don't panic, this article will take you step by step to complete the first configuration from zero to one, and novices can easily get started. Before you begin, make sure you have prepared: Synology DS220+ host Two hard drives (same recommended capacity) One network cable One computer or mobile phone Step 1: Physical installation Install the hard drive Synology DS220+ supports 2 3.5-inch or 2.5-inch hard drives. Unplug the DS220+ ......

First of all, buy accessories online (see the picture below), and at the same time 6 yuan two eMMC master controls, which are used for USB flash drive transformation. Get to the point: 1. Remove the 8G eMMC on the motherboard, solder it to the eMMC master, plug it into the computer, and use Winhex to back up the original system into a bin file for later use. 2. Solder the eMMC 64G (by the way) on the C and D sides of the eMMC live seat, and the A and B sides of the live seat on the motherboard 3. Connect the 64G EMMC soldered in the live seat to the adapter board and USB card reader, and write on the computer......

Modified the script for Feiniu official flashing into emmc It is suitable for N1 to expand the capacity of 32G, 64G, 128G and above to use two scripts: install-16.sh Set the system space to 16g (actually not, the system built-in occupies 2g next to it), and other space can be used as storage space install-32.sh Set the system space to 32g (actually not, the system takes up 2g next to it), and other space can be used as storage space After following the tutorial (find it yourself) to boot from the USB stick......

point-to-point slowdowns in LAN, 99% of which are caused by "SMB multi-channel/cache/TCP congestion control" or "hard disk/power supply drops". The following is the troubleshooting + repair process. First, check whether the "SMB Multichannel" handshake fails. Win10/11 will open SMB Multichannel by default, and once the negotiation fails, it will drop directly to 0 B/s. (1) Temporarily turn off multichannel on the Windows side to admin PowerShe......

After OECT brushes Feiniu, OpenWrt running in Docker can't get into the background, 90% of it is "macvlan completely separates the host from the container" - that is, you can ping OpenWrt from your phone or computer, but Feiniu itself can't open 192.168.x.x, so you think it's "not started", but it's actually fine, but you didn't build it &......

There are a total of 3 ways to "automatically find movies and TV → download→ and warehousing" for Feiniu NAS, and press "Zero Command Line"→ "Geek Edition"→ and "AI Agent" from easy to difficult. Zero command line: Overview of one-click matryoshka steps in the Flying Bull Application Center: (1) Install qBittorrent in the Application Center (2) Install Nastool (or MovieBot) (3)......

When was browsing github, I found AutoGLM-GUI, which can turn NAS into an "AI brain", and upgrade old Android smartphones instantly! It's still good to automatically brush Douyin or something. Don't look at the word count, in fact, it only takes a few commands. Let's share the interface first. AutoGLM-GUI Modern web graphical interface for AutoGLM mobile assistant - makes it easy ✨ to automate AI operations on Android devices Features Multi-......

in order to toss, I changed the PVE (Proxmox Virtual Environment) as the underlying All-in-One to the FlyOS (FlyOS) as the underlying All-in-One, and recorded the energy consumption changes in the whole process to see if the power was saved after the tossing. First of all, the power consumption of PVE plus Aikuai is basically at 12W PVE plus Aikuai plus the standby power consumption of Feiniu OS (I forgot to measure the power consumption of running full broadband) Feiniu OS plus Aikuai standby power consumption Feiniu OS......

want to be "stable", choose PVE as the base, and then virtualize Feiniu OS and ifast respectively; If you want "simple + All-in-One", choose Feiniu OS as the base, and then virtually love fast in its KVM, but you have to accept the risk that the main system will be disconnected once the whole family is disconnected. The following is a key comparison to make it easier to weigh according to your own needs. ...

found a good open source remote networking project, I installed it on my NAS to achieve remote access to the entire LAN, using computers and mobile phones is no problem, it feels good to use, all functions are free. The front-end time also uses other networking products, either the experience is not good, or there are functions to charge, such as accessing the LAN to be charged, I even UPS (to create N100 Feiniu NAS "true uninterruptible power supply": old notebook battery resurrection, power off 0 seconds switch、......