-
The router indicator light is too bright. Only two of the five backends can turn it off. The network port light can only be turned off.
The router is placed in the bedroom, and the indicator light flashes at midnight, making it impossible to sleep. I went through the backends of Huawei, Xiaomi, ASUS, Tenda, and Mercury one by one, organizing the system light turning off locations and physical blackout methods like the network port light that software can't remove....
-
Don’t press too much when restoring Tenda router to factory settings. The reset button and WPS are the same.
The reset button and WPS button on the Tenda router are the same. Hold and hold it for 10 seconds after powering on to restore the whole device to the factory. I accidentally touched it once, and all devices in the house lost contact. This article explains the rescue before reset, three reset methods, and the complete process of resetting up internet after resetting. If you forget your password and can't access the backend, just follow along....
-
The Tenda router manages the two children's Internet access in groups, and they change the time slot in the company app.
Tenda routers restrict children's internet time tendawifi.com parental control: set up groups, select devices, and set up time slots in three steps. The two kids can be grouped and managed separately without harming each other, and can also restrict websites. When at work, I used the Tenda WiFi App to remotely change the time slot. I tackled all three pitfalls of not having internet when the time limit expired....
-
After scanning 40,000 photos in NAS, 18 G attached commands were found to remove duplicate files.
backing up three times after switching phones, the NAS photo library keeps growing. I used fdupes to scan 46,000 photos on the NAS and cleared out 18.9GB of duplicate files. DupeGuru also tested similar photos, and the commands, parameters, and three pitfalls are all here. ...
-
I used a VPN with my router to go home remotely, and the three routes to the NAS outside were open.
When traveling for business and wanting to connect to a home NAS, I tested three routes: routers with built-in VPN servers, OpenWrt with WireGuard, and Tailscale drilling. Public IP is the hard prerequisite; tunnel speed is stuck in CPU encryption and broadband uplink. This article will clarify the accounts....
-
Picked up CR8809 for NT$95, compared with Redmi AX3000 by flashing public version firmware
On Xianyu, I got a Telecom custom CR8809 for 95 yuan. When you open it up to the retail Redmi AX3000, it's the same hardware: IPQ5000 plus 256MB of RAM. The difference lies entirely in the firmware; you can't bind Mijia or stop firmware updates; only after flashing to a public firmware is the machine considered complete. How to ask about motherboard versions, how to flash the device, and who should avoid touching it? This article explains everything clearly....
-
The portable WiFi can be used as a broadband for three months, and I don’t want to recharge it after calculating the cost of the false speed limit.
I temporarily stayed in the old house for three months and didn't want broadband. I bought a portable WiFi device as my main network. During the day, I measured 35MB and dropped to single digits during peak hours. The plan was 3000GB, and after 100GB, the speed was limited. How to choose among the three types, how to identify IoT cards, and whether you can insert your own card are the dividing lines—this article will do the math....
-
Helping my mother-in-law with a camera, here are the switches for five brands to turn off 5G and leave 2.4G.
If you want to turn off only the router's 5G or 2.4G, you need to unplug the dual-band integration first, so the single-band switch will be exposed. When I helped my mother-in-law get the camera, I temporarily turned off 5G and also tried turning off 2.4G, causing more than a dozen smart devices in the family to lose contact for ten minutes. Which one can be turned off, and where the switch is hidden? This article explains everything in one detail....
-
Tenda router port mapping, remote desktop fails when traveling on business without clicking the plus sign
If you want to use your phone to connect to your home computer for files on a business trip, you can map Tenda Port to tendawifi.com's virtual services and set it up in five steps. On my first attempt, I forgot to click the plus sign after filling out the rules, and there were two pitfalls: computer IP drift and internal loop loops. When I couldn't connect, I first checked who sent the WAN port IP....
-
My telecom optical modem kept disconnecting. I memorized the timetable for a month to find the pattern.
Broadband was cut off several times a day. The technician came twice but didn't catch the incident, so I got so frustrated that I recorded the disconnection times for a whole month. Dead night diagnosis, nighttime diagnosis, and random diagnosis each have their own root causes. This article clearly explains the four types of patterns and the self-inspection sequence in one place....

