Home • Router settings > Xiaomi (MIWiFi) - Page 3
-
Xiaomi Mesh sub-router runs in full bars, checking for three symptoms separately, 90% of cases do not require restarting
I added a Redmi AX3000 mesh set for Lao Sun, and everything worked fine that night. The next day, the master bedroom WiFi was full of video bars, but it kept spinning. For sub-routers, check the lights before networking: orange and blue lights are two completely different routes; The full circle is 90% likely because the leg on the return trip is too thin. Examining the three symptoms separately and following their own path is more effective than repeatedly restarting....
-
As soon as the phone connects to WiFi, the entrance light turns on, so I use the Xiaomi router as the trigger for going home
In the post about 'Home Mode,' I used the door lock as the trigger, and the comments kept asking if I could use my phone for tracking. This time I switched to a Xiaomi router: as soon as the phone connects, the WiFi light at home turns on, it takes two or three seconds, and the location doesn't drift and it's free. The three pits and a free-to-get security door were all explained clearly....
-
Xiaomi router firmware downgrade: upgrade disconnect and rollback refused, so use official tools to flash it back
My mom's house AX3000T the firmware was automatically upgraded in the early morning. In the morning, the speaker cameras were all offline. I wanted to revert to the old version and the webpage prompt saying it couldn't be lower than the current version. In the end, I used the official repair tool and the network cable to flash it back in five steps. Before downgrading, clear configurations, disable auto-upgrades, and recognize version settings—these three matters need to be calculated clearly....
-
If you log in to Xiaomi Router 192.168.31.1 on your phone, these things require a new computer
Connect your phone to the Xiaomi router's WiFi, just type 192.168.31.1 in the browser's address bar to access the backend—no need to install an app or log in to your Mi Home account. But the phone opens a simplified interface, where settings like changing DNS and enabling IPv6 can't be found. I tried it with the AX3000T and clearly explained what works and which ones by switching computers....
-
Xiaomi router has dual WAN and two broadbands, so if you get kicked out of online banking, you should avoid this pitfall first
The dual WAN switch on Xiaomi routers is hidden in the advanced settings of the 31.1 web backend, and you can't find it in the Mijia app. How do you set up two broadband lines on one machine, adjust the forwarding rate, and tie your exit when your online banking gets kicked? I tested it for three days using China Telecom plus China Mobile, and the conclusion was quite different from what I imagined....
-
The Xiaomi router's MAC address cloning is hidden at the very bottom of the internet settings
My cousin's house just installed broadband, but the installer left one step and the other connected to the Xiaomi router, but no matter how hard I dialed, the server didn't respond. After a long search, I found that the account was linked to the technician's Mac for debugging the computer. The Xiaomi router's MAC address cloning entry is at the very bottom of the desktop backend internet settings. I searched my phone for a whole day and couldn't find it, so I tried both options on the spot....
-
Xiaomi and ASUS routers differ by only 7MB in actual tests; the 1400 yuan price difference is all switched in the background
My family AX3000T used it for two years, my colleague's RT-AX86U Pro lasted three years, and the same phone's face-to-face speed test only differs by 7MB from 941 to 934. The price difference for 1,400 yuan isn't for the signal, but for the backend switches, VPN server, and Merlin firmware. Five types of people are matched by the same name, and only pay after watching....
-
The Xiaomi AX9000 is a used phone for 300 yuan, the last flagship model, and its gaming frequency is actually WiFi 5
A colleague bought a Xiaomi AX9000 for 330 yuan, a last-generation tri-band flagship for 999 yuan. I went to his place to test all night and discovered: the most hyped game-exclusive frequency band was actually WiFi 5. The real value was actually the dedicated ones that didn't compete for others. USB 3.0, six-core CPU, 2.5G port—these are all sorted out in one article, and I've covered six pitfalls for second-hand device inspections....
-
90% of households don't use Xiaomi 10G BE10000 and the new Pro
Old Wei was tempted to go for a 10-gigabit router at the launch event. I laid out the BE10000 and the newly released BE10000 Pro and did three calculations: the new model is 100 cheaper and has more hard drive space, but the CPU has shrunk, and 90% of dual 10-megabit ports can't feed their families. Read this article before you pay....
-
When upgrading a Xiaomi router, you can configure it synchronously with the same account, but you have to handle all four things yourself
When upgrading a Xiaomi router, you don't need to reconfigure all settings: both new and old devices are on the same device When pairing with a Mi Home app, select 'Sync configuration from old router.' The WiFi name, password, and broadband account will automatically follow through Come. But I couldn't remove the device blacklist, child time slot, static IP binding, and scheduled restart—I went through them one by one on the night I switched I made up for it....

