Home • Router settings > Xiaomi (MIWiFi) - Page 2
-
Xiaomi routers only have 100 Mbps, and the gigabit port is compressed to 100 Mbps, first check the connector
When the Xiaomi router was plugged in and the network cable was plugged in, the speed was only 100 Mbit/s, and the Gigabit broadband was not fully utilized. It was probably not that the router was broken, but that the network port negotiation was suppressed to 100 Mbit/s. I'll write this down 192.168.31.1 How to check the negotiated speed on both sides of the computer network card, the three real culprits of four-core network cables and old network cards, and how to check back to Gigabit after changing the cable head. ...
-
Xiaomi router: 192.168.31.1 binds a fixed IP in two steps
As soon as the printer and NAS at home are restarted, they cannot be found on the computer, and port forwarding also fails. I checked and found out that the IP sent by DHCP changes every time. Enter Xiaomi router 192.168.31.1 , bind the device MAC and fixed IP together, and printers and NAS will no longer change addresses randomly. This article describes how to hide the address pool, how to copy the MAC, and how to recheck after binding. ...
-
Xiaomi router UPnP settings location: PS5 online NAT3 keeps failing, I put 192.168.31.1 I turned to the bottom to find it
Xiaomi router UPnP switch hidden in 192.168.31.1 In the advanced settings, the Mijia App is basically unavailable. This article records my troubleshooting process for turning on UPnP for AX3000T, PS5 or NAT3.: Where is the menu, why does it not take effect when enabled, how to confirm from the mapping list, and finally how to divide the work between UPnP and port forwarding DMZ. ...
-
If you can't find the Xiaomi router in the Mijia app, it's most likely because you connected to the wrong WiFi or your old account wasn't unbound
The Xiaomi router is equipped with a good network, but the plus sign in the upper right corner of the Mijia App cannot be found. It is probably not the router that is broken. This article records the pitfalls I encountered while helping my neighbor bind AX3000T.: The phone is connected to the wrong WiFi, Bluetooth positioning is not turned on, the iPhone's local network is not provided, the management password is used as the WiFi password, and the old account is not unbound. After checking in five steps in order, it is bound. ...
-
Xiaomi router DMZ is hidden at the bottom of port forwarding; first confirm the public IP address
The DMZ switch of Xiaomi router is not in Mijia App, it is hidden in 192.168.31.1 Advanced Settings→Port Forwarding page is at the bottom. This article explains the four-step activation method, how to confirm the public IP first, how to measure the mobile phone traffic after activation, and why I do not recommend opening DMZ for NAS and cameras for a long time. ...
-
Xiaomi router 192.168.31.1 background port addition and forwarding rules
Xiaomi router port forwarding entrance is hidden in 192.168.31.1 In the advanced settings, the mobile app cannot be opened. This article explains all the pitfalls I encountered on the AX3000T from adding rules, how to fill in the four fields, to checking the WAN port IP, intranet self-test, and NAT backflow when the external network is still unable to connect after setting it up. ...
-
If you set the Xiaomi router whitelist in the Security Center, even if you enter the correct password for freeloading the internet, you can't get in
The Xiaomi router whitelist is hidden in the Security Center of Frequently Used Settings, and with wireless access control enabled, devices outside the list cannot connect even if they enter the correct password. I tested a month with 62 devices, and found three pitfalls: customers couldn't connect, new equipment failed to connect to the network, and Changkuai connection failed. I had to prepare solutions before opening the service. ...
-
When transferring files via SSH on a Xiaomi router, WinSCP fails to connect mostly due to the protocol freeze
After unlocking the Xiaomi router SSH, I want to pass in a configuration, but WinSCP says it cannot initialize the SFTP protocol, and the command-line SCP also gives an error. The problem lies not with the password but with the protocol. Xiaomi's firmware dropbear doesn't recognize SFTP at all. Change the WinSCP file protocol to SCP and SCP commands and add -O to get through. There's a legitimate way to transfer large files....
-
Xiaomi router connects smoothly, changes passwords without disconnecting, but multiple invisible WiFi devices
Changkuai Connect is a feature enabled by Xiaomi routers by default: when you change the WiFi password, the router automatically syncs the new password to the Mi Home device, so you don't have to reconfigure speakers and TVs one by one. The trade-off is that the router will quietly open a hidden WiFi that you can't find, and anyone trying to bypass the internet by changing the password has to turn it off first. Three switch locations, supported models, and the anti-scratch mesh three-piece set are explained all at once....
-
Seven reasons why the Xiaomi router light is on but the name is gone, and WiFi can't be found
The name of your home WiFi suddenly disappeared from your phone list, but the router lights stayed on? I ranked seven reasons based on probability: timed switching to a specific point, dual-band name changes, channel running to 12/13, old devices not recognizing 5G, and unpopular Chinese WiFi names like garbled characters. First, distinguish which one you can't find before you proceed....

