Home • All articles published on 2026 Year 10 Month - Page 3
-
192.168.1.1 has few options on mobile; you have to switch to the desktop version to find it
Open the mobile browser 192.168.1.1 After logging in, there are very few menus. It’s not that the router is broken, but that the advanced functions are hidden on the mobile version page. This article describes how I switched to the computer version from my mobile browser, and retrieved the three options of port forwarding, IP binding, and firmware upgrade at once, as well as the remedy for two old routers that couldn’t be switched. ...
-
Xiaomi router DMZ is hidden at the bottom of port forwarding; first confirm the public IP address
The DMZ switch of Xiaomi router is not in Mijia App, it is hidden in 192.168.31.1 Advanced Settings→Port Forwarding page is at the bottom. This article explains the four-step activation method, how to confirm the public IP first, how to measure the mobile phone traffic after activation, and why I do not recommend opening DMZ for NAS and cameras for a long time. ...
-
If you add a special character to your WiFi password, the camera can't enter it, so you have to switch back to 12-bit to calm down
Adding special characters to the WiFi password is not necessarily safer, and may also cause the network configuration of old TVs and cameras to fail. This article records the pitfalls I have stepped into: Why is 12-digit alphanumeric mixed better to use, how to choose WPA2-PSK/AES as the encryption method, how to change 2.4G and 5G separately, and in what order to reconnect after the change. ...
-
If the optical modem USB port doesn't respond and the USB drive doesn't respond, that's not a fault. Huawei and ZTE have even tried the backend
The USB port on the back of the optical modem is not a decoration, but it doesn’t mean it can be used just by plugging it in. I tried Huawei HS8145V, HS8145C5 and ZTE F663NV3a one by one.: FAT32 U disk can be shared, directly accessed by Windows, and old printers can be converted into network printing. ; exFAT, bridge mode, carrier lock function, it is normal if there is no response when plugged in. This article explains the two backend paths and three pitfalls thoroughly. ...
-
When switching to a telecom optical modem for bridge, first take a WAN meter, but if you can't dial it, 90% of it gets stuck on VLAN
Changing the telecom optical modem to bridge connection is not just a click.: First take telecomadmin, take a photo of the entire page of the WAN connection table, look for the INTERNET one and change it to Bridge, bind only LAN1, and then fill in PPPoE on the router. I went through the two sets of menus of Huawei HS8145V5 and ZTE F7015T, and wrote down the order of troubleshooting when dialing failed, and the two accounts of IPTV and ITMS. ...
-
The Mercury Tengda router fixes the device's IP address in the background, so the printer will no longer lose contact
The IP changes as soon as the printer is restarted, and the print queue and port forwarding become invalid. I have saved both Mercury D191G and Tenda AC10 with fixed IPs. Mercury uses IP and MAC binding, and Tenda uses DHCP server static allocation. After adding the two devices, the printer and NAS have never been disconnected due to address drift. ...
-
WiFi 6 router TWT turned on to save power, but the door lock notification was delayed
The TWT switch in the background of the router does not make the network speed faster, but makes the battery-powered device wake up less often. I drove it for two weeks: The thermometer and hygrometer does slow down when it loses power, but the door lock exit notification is occasionally delayed. Huawei, TP-LINK, and Xiaomi have different names and switch positions. This article explains clearly the switch logic, who is suitable for it, and what symptoms should be turned off once. ...
-
After the NAS reboots, the Docker container won't start. First, check these three places
As soon as the NAS is restarted, Docker containers such as Jellyfin and AdGuard Home are often lazy and do not start up. Don’t delete the image and reinstall it first. Check the restart strategy, startup sequence, and disk mounting. My experience with 9 containers is here. ...
-
192.168.1.1 Don't rush to change the network segment—let's first calculate these five things
Before changing the router's LAN port IP, first make clear the three accounts: optical modem on the same network segment, dual routers on the same IP, and company VPN. Don't just follow the tutorial and change it casually. Otherwise, the background connection will be lost, the NAS port forwarding will be completely disconnected, the mobile phone will be full and there will be no network, and you will need a Taiwanese device. ...
-
Xiaomi router 192.168.31.1 background port addition and forwarding rules
Xiaomi router port forwarding entrance is hidden in 192.168.31.1 In the advanced settings, the mobile app cannot be opened. This article explains all the pitfalls I encountered on the AX3000T from adding rules, how to fill in the four fields, to checking the WAN port IP, intranet self-test, and NAT backflow when the external network is still unable to connect after setting it up. ...

