Home • All articles published on 2026 Year 10 Month - Page 2
-
For smart socket power statistics, I used the power meter correctly for a year, and all errors were in low-power standby
The daily electricity consumption in the smart socket app should not be used directly as an electricity bill. The error for high-power appliances is small, but the error for low-power standby devices such as routers, optical modems, and TV boxes can be several times higher. In this article, I used a power meter to check the results for a year, explaining which numbers to believe and how to read the trends. Don’t mistake the falsely high standby wattage for using too much electricity. ...
-
192.168.1.1 Searches as soon as you enter it. Change these three settings on your phone and computer to go to the background at once
Browser address bar 192.168.1.1 , press Enter but jump to the search page, don’t be in a hurry to reset the router. Most of them are because the decimal point is replaced by a Chinese period, the browser uses the address bar as a search box, and the mobile phone is connected to a VPN. This article clearly describes the steps I took to help my friend troubleshoot. Type an extra http:// and a slash on the phone, and change the address bar settings on the computer to enter the background stably. ...
-
If you can't find the Xiaomi router in the Mijia app, it's most likely because you connected to the wrong WiFi or your old account wasn't unbound
The Xiaomi router is equipped with a good network, but the plus sign in the upper right corner of the Mijia App cannot be found. It is probably not the router that is broken. This article records the pitfalls I encountered while helping my neighbor bind AX3000T.: The phone is connected to the wrong WiFi, Bluetooth positioning is not turned on, the iPhone's local network is not provided, the management password is used as the WiFi password, and the old account is not unbound. After checking in five steps in order, it is bound. ...
-
The router's backend has a bunch of Unknown and 192.168.1.100 files, all labeled with the first six bits of MAC
There are a bunch of Unknown, android-xxx and 192.168.1.100 , if you don’t know who is who, please don’t kick it before changing the remark. This article describes how I used the first six MAC digits, the device's own IP address, and three tricks to disconnect the network. I labeled the 37 devices in my home one by one, and then fixed the IP easily to facilitate speed limiting and blacklisting in the future. ...
-
After the optical modem bridges, the router's dial fails; if the computer connects directly to the optical modem, you can tell who's to blame with just one tap
After the router was changed to a bridge, dial-up always failed. I first used a network cable to plug the computer directly into the optical modem and did a PPPoE dial-up test to find out whether it was a problem with the optical modem line or the router settings. This article explains clearly how to set up the wiring port and computer dial-up, and who the two error codes 691 and 651 point to. ...
-
The telecom optical modem is securely fixed to the IP in two steps, so the printer and NAS restart will no longer lose contact
The IP of the printer and NAS changed as soon as I restarted it. I found the static address allocation in the Tianyi gateway and tied the device MAC to the fixed IP before it stopped. This article makes it clear 192.168.2.1 How to save the background entrance and address pool, and why the random MAC of the mobile phone must be turned off. ...
-
Mercury Tengda router DMZ host settings: port mapping is blocked, leaving only one old computer exposed
The port mapping always failed when playing with Moonlight streaming. I finally turned on the DMZ host in Mercury D191G and Tenda AC10, and only filled in an intranet IP to test the success. This article explains the difference between DMZ and port forwarding, the two backend paths, and why opening it is useless when there is no public IP. ...
-
I tried 114.114.114.114 and 223.5.5.5 for half a year, and the whole family uses this DNS
The Internet connection at home was always good and bad. When opening a web page, it would often freeze for two seconds. Later, I suspected that the DNS in the router was holding me back. I set the carrier as default, 114.114.114.114 , 223.5.5.5 , 8.8.8.8 I ran them all and recorded the delay and hijacking performance. This article explains which one should be filled in for home use. ...
-
NAS external network access, port 5001 was bare-shut for a week, and I only left one UDP port
Synology's port 5001 is directly connected to the public network. The strange IPs in the logs try passwords every day, which makes my back shiver. This article explains how to choose four remote access routes to NAS, how to use reverse proxy and HTTPS, and finally I changed to WireGuard and Tailscale, leaving only a UDP port to stop. ...
-
No switching WiFi roaming, phone sticking to 2.4G instead of switching to 5G, turning off dual-band integration and adjusting two numbers
When walking from the living room to the bedroom, the phone still clings to 2.4G and spins in circles while watching videos. It's not that the phone is lazy, but that the router doesn't take the initiative to kick it. This article describes how I judge whether to cut off or not, first turn off dual-band integration, then adjust the weak signal rejection threshold and 2.4G power, and finally explain when it is useless to adjust a single route and use Mesh. ...

