1. Current Location: Home >  192.168.2.1 >  If the IPTV is broken, don’t wait for the master. The whole process from the time you make the call to when he leaves is recorded.

If the IPTV is broken, don’t wait for the master. The whole process from the time you make the call to when he leaves is recorded.

The whole process of IPTV repair report: Every step from calling the 10,000 number to the master leaving

The IPTV at my mother-in-law's house was broken in the twelfth lunar month. The screen was completely black and the remote control was useless. Her first reaction was to wait for me to come over on the weekend to take a look, and her second reaction was to call number 10,000. I went both ways, but it took three appointments with the master to repair it.: The first time I couldn't explain my symptoms on the phone, I was placed on the order. The second time the master came to the door and found that I had unplugged all the wires and arranged them neatly. It took him 40 minutes to reconnect them. It was only the third time that the repair was actually done. Write down the pitfalls of canceled orders, wasted runs, repairs that were not accepted and then had to be reworked one by one. If you want to report for repairs on your home TV, you can go through them one by one and save half the trouble.

Before making a call, prepare three things

The customer service number 10000 cannot see your TV through the phone. The more complete information you report, the more accurate the work order will be dispatched. This is where my first phone call came from.: The only thing that said on the phone was "The TV is not working." The customer service asked me what model the box was and when it was installed, but I couldn't answer. She could only open a vague work order under "TV failure", and then the system returned it and reassigned it, leaving me to wait an extra day. I learned my lesson the second time and prepare all three items before making a call.

The first thing is the box model. Look at the sticker on the bottom of the box. Copy down the words ZTE B860A and Huawei EC6108. ; The second thing is the phenomenon and starting time. Did the black screen stop at the startup logo or enter the channel list and go completely black? At what time and day did it start? The more specific the better. ; The third thing is the operations you have already done yourself. How many times have you restarted and unplugged and plugged in cables? If you tell the customer service, you will not have to do it all over again on the spot. Putting these three together, customer service can basically put the work order directly into the right queue. I checked Shaotai’s article before I have written in this article that if you call and report the channel grouping and list version number first, the customer service can check the authorization on the spot. For some problems, you don’t have to wait for the master at all.

If you speak incorrectly, the work order will go to the wrong queue.

This step is the most critical. 「I can’t watch the TV.” In this case, customer service couldn’t start working because the TV, box, and broadband were three different systems in her place. What you need to report when reporting an IPTV failure is "IPTV set-top box", followed by "phenomenon": Is the power indicator light on the box on? Is it stuck on the startup screen or is it spinning in circles for authentication? Is there an error code popping up? The string of numbers in the error code is particularly valuable. The master can directly check the record in the work order system, saving a visit. The article on power-on certification I mentioned before that "report an error code and let the computer room refresh the account." This method can be solved remotely over the phone and is the fastest.

There is still a point to be measured.: Don’t report IPTV failures as broadband failures. Broadband repair reports go through the line of installation and maintenance masters, while IPTV goes through multimedia work orders. If an error is reported, order dispatch will be slow. The broadband at home is obviously normal, but the TV is broken. On the phone, you should take the initiative to say, "The broadband Internet access is normal, but the IPTV signal is not available." The customer service will know which system to place an order with. On the other hand, if the broadband is also disconnected, then repair the broadband first, and IPTV will probably survive on its own. This judgment logic is Broadband repair report I have already written about speed testing and evidence, so I won’t repeat it here.

Make an appointment: If you can choose the morning, don’t choose the afternoon

Once the work order is placed, customer service will ask you when you want to come. There is a real experience here: If you can make an appointment in the morning, don’t make an appointment in the afternoon. The work orders of the installation and maintenance master are scheduled from morning to night. The orders in the morning are accurate in time. If there is a delay before the order in the afternoon, your home will postpone it. The scheduled two o'clock may not arrive until five o'clock. My second appointment was in the afternoon, and my mother-in-law sat there from 1:30 to 5:10. The old man and the old lady did nothing all afternoon. The third time around 9 to 11 am, the master knocked on the door at 9:40.

There is another thing that is easy to miss when making an appointment.: Someone at home must be present throughout the whole process, don't think about "doing whatever you want" when the master comes. After the master leaves, there are a lot of things that you need to confirm. If the person is gone, the appointment will be in vain. If there are only elderly people at home, you can take a leave of absence or watch remotely via video. The elderly people can't explain the symptoms to the master, and ten minutes of work can be wasted into half an hour.

Before the master comes to the door, he has to do one thing: Photograph

This is the most unfair pitfall I have stepped into. Before the master came the second time, I cleaned up the back of the TV cabinet at my mother-in-law's house. I unplugged all the cables from the box and tied them up, hoping to save the master trouble. As a result, the first thing the master said when he arrived was, "Don't move the thread. If it does, I have to try it one by one from the beginning." He brought an optical power meter and a spare box, and his troubleshooting idea was to follow the original wiring to locate the faulty section. Unplugging all the wires would destroy the site. It took forty minutes to reconnect. In the end, the repair was not completed that day, so he made a third appointment.

The correct way is to do the opposite: Don't move any wires. Use your mobile phone to take a clear picture of the wiring on the back of the optical modem and the back of the box. These two photos have three uses - before the master comes to your door, you send him a work order or show it to him, so that he knows it in advance. ; When he reconnected, the photo was the answer, so there was no need to guess which wire was plugged into which port. ; After checking it, I could see at a glance where he had moved. Is the port on the back of the box plugged into a network cable or an AV cable? Is the ITV port on the optical modem empty? They are all in the photo. This is The box wiring article There is a complete set of oral instructions, so if you don't know the number, take a look in advance.

During the half hour the master was there, he asked three things

The master will come to your home to repair the IPTV, and it will take ten minutes if you are quick. There are three things worth asking on the spot in these ten minutes, no matter how late they are. The first thing is to ask which layer the fault occurs on.: Is it because the hardware of the box is broken, the IPTV connection of optical modem is broken, or there is an account problem on the platform side. The answer determines the subsequent countermeasures. If the hardware breaks down, he will replace the box on the spot. If there is an account problem, he will go back and rectify the problem in the system. Second thing, if you change the box, ask how long it will take for the binding to take effect.: The new box needs to be re-binded to the broadband account, which can take anywhere from half an hour to a few hours. I have written this in The article about replacing a new box , don't treat it as a new fault if it doesn't take effect after the master left. The third thing was to ask him if he would take the old equipment with him.: The box is a registered asset of the operator. He will usually take it away without you asking. Some workers forget to take it, and you won’t be able to explain it later.

Don't get too close to give instructions when the master is working, but there is one action worth doing.: When he measured the light attenuation and checked the multicast, he took a closer look at the values. When it comes to going back for repairs or filing a complaint with the Ministry of Industry and Information Technology, these values ​​are the evidence. The intractable disease of evening rush hour mosaic, The article on multicast packet loss I have written about how to use light attenuation readings. Once the master hears whether you can tell whether it is -26 or -28, he will take his attitude a little more seriously.

It's not the end when he leaves, only the acceptance is considered completed.

The master's standard is to "make the picture stand out", and your standard must be one level higher than his. After pretending, he saw the channel list coming out and called it a day, but he would spend at least another five minutes doing four things with his own hands.: Just switch to five or six channels during the live broadcast to see if there are any mosaics or black screens. ; Go to an on-demand program and play it for a minute to confirm that it can be played without using the broadband channel. ; If you need to rewatch, try rewinding last night’s program. ; Finally, take a look to see if the sound and picture match. After the third repair, I missed the acceptance check. The mosaic came out again the night the master left, and I called again to make up the order, which took three more days.

After the acceptance has been passed, take another minute to write down the work order number in the memo on your phone, along with the symptoms of the fault and how to fix it. The work order number is used as a voucher for subsequent progress inquiries, repairs, and reconciliations. The master's phone number and the work order number are a pair. If it is broken again after three days of repair, please call back directly by quoting the original work order number. This is a repair order and has a higher priority than a new order. If no one cares about the procrastination, then press Look for the article from the Ministry of Industry and Information Technology If you take the upgrade path, the work order number and timeline are ready-made complaint materials.

stage things to do The pits that have been stepped on
before calling Prepare the box model, phenomenon start time, and operations performed Unable to explain the symptoms, the work order was returned and reassigned, and I had to wait another day.
In call Report "IPTV set-top box" phenomenon plus error code The result was "cannot watch TV" and the order was sent to the wrong queue.
Make an appointment Priority is given to the morning, there will be someone at home the whole time I waited for about three and a half hours in the afternoon, and the old man waited all day in vain.
Before coming to your door Don’t touch any of the wires, take two pictures of the wiring All good psychological cords were disconnected, and the master reconnected them for forty minutes.
Master is present Ask about the fault layer, binding effective time, and the destination of the old equipment. Regardless of the binding time, if it doesn’t take effect half an hour after leaving, it’s a new fault.
After he left Check and accept four items in five minutes, record the work order number It was not accepted, it relapsed that night, and it took another three days to repair it.

The deepest feeling during the whole trip: When it comes to IPTV repair reports, the visit of the master is just the middle step. The first phone call and the subsequent acceptance are all your own work. If you are lazy at both ends, you will have to make a few more trips in between. If there are elderly people at home, it is easier to print out this form and stick it next to the TV cabinet than having to control it remotely every time. After finishing the repair, I set up the consumption password, so that the next person who comes to the door is not the master but the biller. This matter is The on-demand deduction article I’ve written it here, but I won’t expand on it.

Read More


Copyright Notice Scan to read on mobile
All Rights Reserved: 《SHUNOT》 => 《If the IPTV is broken, don’t wait for the master. The whole process from the time you make the call to when he leaves is recorded.》
Article URL: https://www.shunot.com/en/192-168-2-1/1587.html
Unless otherwise stated, all articles are original by 《SHUNOT》. Reposting is welcome! Please indicate the original URL when reposting, thank you.

Contact Us

Online Consultation: Click here to send me a message

WeChat ID: master_135

Scan to follow