-
The network cable in the weak current box has no label and the power supply cannot be plugged in. I cleaned it up and haven’t touched it for two years.
The weak current box was a mess when opened, the network cables couldn't tell which room was connected, and the power adapters were squeezed together and couldn't be plugged in. I spent an afternoon attaching labels, rearranging equipment, and securing cables. After tidying up, I hadn't moved it for two years. Identifying lines, positioning, and organizing lines—three steps—explained in one article....
-
The router is equipped with DDNS and can be connected to the computer and NAS at home at any time outside.
When working away from home, you try to dig up files from your home NAS, but your domain name works fine the day before and then disappears the next day. The root cause is that the home broad public IP is quietly being changed. This article describes the entire process of setting up DDNS: first check the public IP, then choose a free domain, the router's backend is set up in a few minutes, and the port forwarding pitfalls are also clearly explained....
-
Tenda router firmware can be upgraded online with one click. If it is not detected, go to the official website locally.
Upgrading the firmware of Tenda routers is easier than Mercury, tendawifi.com backend comes with one-click online upgrade detection, and you can upgrade directly within the app. If the online prompt says there's no new version, don't give up. Go to the official download center, download the firmware according to the hardware version, and upgrade locally. I tested the entire process with AC10 V6.0, including what to copy before upgrading, what to check after, and which types of machines not to upgrade randomly. Everything is listed for you....
-
Telecom's optical modem turns on IPv6, but the router has no address and is stuck on the optical modem layer 90% of the time.
IPv6 switch on the router, test-ipv6.com still 0 points? It's the same at my house—after a night of fiddling, I realized the switch was on the router and the key was in the optical modem. To change the IP mode of optical modem routers, there's also the pitfall of prefix delegation—explained all at once....
-
Synology SHR and RAID1, wrong choice of 4T and 8T, wasting 4T in vain
Is installing Synology a storage pool stuck between SHR and RAID1? I calculated the accounts using two 4T+8T drives: the same capacity drives are exactly the same, but the mixed capacity SHR can provide 4TB more usability, but the extra portion has no redundancy. Expansion rules, no redundant pits, and numbered seating tables—read them before clicking next....
-
The difference between MAC address and IP address, the random MAC of the mobile phone will be explained clearly at once
What does a MAC address mean? It's an ID card that burned out of the factory with the network card, and the IP address is the address issued by the router—one stays the same, the other changes. The router binds to the speed limit, and if blocked, it recognizes all MACs. The default random MAC on your phone can cause these functions to fail collectively. This article explains the differences, tips for identifying devices, and how to choose the random MAC switch....
-
Xiaomi router is connected to the IPTV set-top box, and the switch is hidden on the third layer of advanced settings.
How to connect a Xiaomi router to an IPTV set-top box? After switching to optical modem bridge, the TV goes black and the set-top box plugged into the router's LAN port has no signal—actually, this is because the IPTV setup is missing. The new Xiaomi router has an IPTV switch hidden in the advanced settings at 192.168.31.1. If you select the correct mode and enter your VLAN ID, you can recover it. The older model doesn't have this option, but there are three alternative options. This article explains wiring, settings, and three pitfalls all at once....
-
Network cable socket panel wiring: According to the color-coded thread, I broke the thread cover first.
How to wire a network cable socket panel? For renovation, I left the cable section in the 86 box, just install a network module according to the color code and cable card, no need to carry T568B wiring sequences. A wire cutter costs over ten yuan per piece, and the first time I hit it, I broke the wire cap. This article explains the tools, steps, three pitfalls, and verification methods all in one place....
-
The router's scheduled network disconnection does not execute in the middle of the night, and 90% of the time the system time has returned to zero.
If the router timing is wrong, the scheduled restart, WiFi scheduled on/off, and parental controls all run at the wrong time, and the log times don't match either. The root cause is that the home router has no battery, and the power outage resets to zero. This article clearly explains the principles, the time setting paths for each brand, and how to fill in the NTP server....
-
Mercury router hides WiFi, the background switch is actually called wireless broadcast
If the Mercury router wants to hide the WiFi signal so others can't find it, it's normal to search the melogin.cn and still not find the switch—it's not called hiding, it's called turning off wireless broadcasting. 2. 4G and 5G each have a switch. After hiding new devices, you have to manually add the network. Vacuum cameras and cameras are also hidden. I've listed all the pitfalls I've made for you....

