Home • Router settings > Xiaomi (MIWiFi) - Page 9
-
Xiaomi router hides WiFi signal, and the sweeper cannot connect after hiding it
Xiaomi routers hide WiFi signals. In the WiFi settings of 192.168.31.1, there is a switch to turn off broadcasting, which can also be operated via the Mi Home app. But after hiding, your phone or computer won't automatically reconnect, and smart devices like vacuum cleaners and cameras simply can't find the network. This article goes through both the operations and the pitfalls....
-
Xiaomi router speed limit, 192.168.31.1 and Mijia App
How do you limit the speed of a device on a Xiaomi router? This article clearly explains the complete operation of the 192.168.31.1 web backend and Mijia App entry points, the appropriate limit, the three reasons why restrictions don't work, the differences between disabling and speed limits, and reference numbers for each live TV box. I tested it with my home AX3000T....
-
Xiaomi AX3000T and Huawei AX3 mixed mesh test for three days
Can Xiaomi routers match Huawei's ZTE router group Mesh? I tested it for three days using a Xiaomi AX3000T paired with a Huawei AX3. The official app route didn't work, so I switched to wired AP mode to combine the two devices. I'll explain exactly when it's worth mixing and when to buy from the same brand. ...
-
Don’t throw away the old Xiaomi AX3000T. Change the wireless relay to supplement the kitchen signal. The management IP will become 31.39.
How do you set up wireless relay on a Xiaomi router? I changed the replaced AX3000T to relay mode to supplement kitchen signals. The 192.168.31.1 backend work mode switch full process, after relay, the management IP becomes the 31.39 pitfall. I'll explain when relay is sufficient and when Mesh should be added....
-
I forgot my Xiaomi router background password. 192.168.31.1 If I couldn't get in, I used tools to find it.
I forgot my Xiaomi AX3000T backend password. My first reaction was to reset it, but I lost all the configurations and had to reconfigure the network. I used the telnet tool to enter the background to retrieve the configuration, and tried twice to retrieve the password. This article explains clearly the method that can save my life. ...
-
Mijia devices always show offline, and the camera and speaker can be checked in order.
Devices in the Mi Home app often turn gray, cameras disconnect at night, and speakers call out in the middle of the night—most cases are not due to device failure. This is the troubleshooting sequence I figured out after repeatedly disconnecting my camera and socket: first, distinguish between true offline or cloud exhaust, then check whether it's a single unit or a batch. Check three times on the device side, check twice on the router, and run through the process in order, basically able to locate the location....
-
Xiaomi router Mesh roaming does not switch, I figured out the roaming stickiness issue
What to do if Xiaomi router Mesh roaming won't switch? The phone walked from the living room to the bedroom. The Zi router was right next to it, but the signal was still stuck to the main router, and the video card was stuck like a PowerPoint slide. This is a hands-on record of how I smoothed roaming after setting up two AX3000T mesh sets at home: how to use WiFi Gadget to check RSSI to confirm it doesn't stick, whether to change roaming parameters, whether 802.11r is about to disconnect or is useful, and which three situations are useless—just changing the options....
-
Xiaomi router moved and changed IP, 192.168.31.1 Avoiding pitfalls
How to change the IP address of the LAN port on a Xiaomi router? The LAN settings in the 192.168.31.1 backend are deeply hidden. Before changing them, think carefully about why: after bridging the optical modem, avoid the ISP subnet; run the router under it to prevent IP conflicts. This article is my hands-on record of changing my AX3000T's LAN port from 31.1 to 31.2, including the necessary DHCP check, gateway reconnection, and self-rescue methods for forgetting to reconnect the phone network and not connecting to the backend after the incorrect segment. ...
-
After three days of research on choosing a router for my parents, I finally figured out the difference between Redmi and Xiaomi.
What exactly is the difference between the Redmi router and the Xiaomi router? Both AX3000 are over 100 yuan each, the other over 200 yuan. What did you buy for 100 yuan more? This is my notes from helping my parents pick out routers, reviewing both product lines: differences in positioning, whether the signal and firmware are the same, which money is worth and which is just a waste of money, and finally gave three tiers based on house type and broadband to directly copy the workload. ...
-
Xiaomi router has an upper limit, and 62 devices will no longer be disconnected after slimming down
With more and more cameras, speakers, and robot vacuums at home, how many devices can Xiaomi routers actually carry? This article describes my hands-on test of running through 62 devices at home: how to check the official number of devices, why does it disconnect when there are many devices, how to check who is occupying a seat in the backend, how to split traffic when 2.4G is crowded, and which device to switch to if it's really not enough....

