-
192.168.2.1 Can't open, check the order of login to Telecom Optical Mode
192.168.2.1 What should I do if I can't open or get in? This article describes how I helped colleagues and neighbors deal with Telecom broadband login issues: Is your 2.1 connected to the Telecom Tianyi gateway or a router pushed aside? How to check the real gateway on your phone? Where is the useradmin password? What to do if you get remotely pushed back by Telecom in the middle of the night after changing the configuration. If you follow this search, it should be accessible....
-
I cannot log in to the Mercury router with the initial password admin. The rules for the new and old models are different.
What is the initial password for the Mercury router? I tested two Mercury models at home: the old MW325R was admin/admin, while the new D191G didn't have a default password at all. The first time I set it in the background, it was the correct one. This article explains how to distinguish between new and old models, the three pitfalls of the admin entering incorrectly, and two tricks to recover the password if you don't reset....
-
I can’t change the cable for my rental network, so I tried portable Mesh, portable router, and power modem, and kept two things.
In a rental, you can't drill holes or change cables; the landlord's broken router is stuck in the shoe cabinet with poor signal, and the desktop and NAS still want wired connections. This is a portable networking checklist I tested after moving three times: portable Mesh wireless return trip, portable router temporarily plugged, old electric cat crashes, USB network card to extend the desktop computer's life—don't buy whichever you can take with you. Read this to avoid wasting money....
-
I have used both two-bay and four-bay NAS. Let me show you the calculation.
Should I buy a NAS with two bays or four bays? The first one I bought was a two-bay DS220+. A year later, it was replaced with a four-bay model. The extra money I spent was far more than the price difference of one chassis. This article calculates the RAID configuration, actual capacity, expansion room and electricity cost of the two disks.: For some people, two bays are enough, for some people, four bays are enough, and for those who want to add SSD cache, it won’t hurt to place an order after reading this. ...
-
The router's firmware automatically upgrades, but I've suffered a huge loss and changed it manually.
Should the router firmware auto-upgrade turn on? My Xiaomi AX3000T automatically upgraded at midnight to clear all port mappings, but WOL wake-up stopped working. Since then, I have switched to manual mode. This article clearly explains what to repair during upgrades, which three types of machines are recommended to use, which three must be manually monitored, and includes backup and rollback methods that can be completed within two minutes before the upgrade. Follow these instructions to avoid upgrade failures....
-
192.168.1.1 Fighting with IP, optical modem will be fine after changing the IP
trying to enter 192.168.1.1 to enter the router's backend, the page pops up instead of the optical modem's page, or either cannot be accessed. This means the optical modem and router's management address are colliding. This article explains how to determine which provider's backend you're entering from, what network issues can occur during conflicts, how to change the router's LAN port to 192.168.2.1, and what to pay attention to after making the changes. ...
-
Xiaomi router gets hot and cuts off in summer, from covering it with cardboard to completely solving it
Xiaomi routers get hot every summer, causing video scrolling and gaming latency to spike, making them feel hot to the touch. This article explains how I troubleshoot heating and interrupted current: first distinguish whether it's overheating or channel issues, then try cooling by raising the ceiling, repositioning, and adding fans in real-world tests, and finally talk about which old problems really can't be fixed. ...
-
After decorating the network cables, reorganize them again. Starting from Category 6 Super, leave a port in each room.
network cables were not planned properly during renovation, after moving in they could only use exposed cables around walls or endure poor signal. This is a wiring checklist I compiled from my own home and reviewed for friends: Cat6A or Catademia 6A, whether to replace the weak current box with a larger one, how many ports to leave in each room, how to reserve the optical modem bridge—everything explained in one go. If you copy it carefully, you won't regret copying it. ...
-
192.168.1.1 After logging in, novices should do 5 security settings first
192.168.1.1 login successfully is only the first step; if these issues aren't fixed in the backend, it's just running bare: admin password still used, remote management enabled, firmware hasn't been upgraded for three years. This is a real account of my homework after being tested on passwords. I'll give specific instructions for each of the five things, and after half an hour, I can sleep soundly. ...
-
Mobile phone photos are automatically backed up to NAS, and two of the four solutions were tested.
my phone is full of photos and I can't bear to delete them, and WeChat Data Transfer Assistant keeps sending messages and lowers image quality, I tried all four options for automatic backing up of phone photos to NAS: Synology Photos, Feiniu album backup, Immich self-built, and the dumbest SMB manual copy. This article explains who each is suitable for and where the pitfalls lie. Here's a comparison table at the end. ...

