Home • All articles by author SHUNOT - Page 78

  • The sweeping robot failed to connect to the WiFi main distribution network. It turned out that it only recognized 2.4G.

    the robot vacuum fails to connect and the smart bulb can't find the network, it's usually not because the device is broken, but because it only recognizes 2.4G. I disconnected the dual-band integration and fixed the channel at channel 1. After five failed network configurations, I finally succeeded all times, all of which were faults with the router. ...

    2026-9-9
  • Mobile phone connection 192.168.1.1 3 pitfalls in changing WiFi password

    General process to change WiFi password connecting to 192.168.1.1: Connect to WiFi, go to the background via browser, find Wireless Settings to change the password, and it's done in five minutes. Here's a comparison table for each brand's backend entry point, along with three pitfalls I've encountered: mixing up login passwords and WiFi passwords, disconnecting after changing old devices, and passwords that are too short and causing dictionary entries. ...

    2026-9-9
  • Mercury melogin.cn Unable to log in, finally stuck on DNS

    What should I do if Mercury router can't be opened melogin.cn imported? When I helped my neighbor check this D268G, I went through five situations one by one: entering a search term, being forced to jump to HTTPS, not connected to the router and unable to resolve the domain, having a private DNS on the phone, and having already changed the gateway. Ultimately, only one path between domain name and IP address works. Following this article, you can see the login window within ten minutes. ...

    2026-9-9
  • Second-hand TEWA-750G is registered with China Telecom, and the LOID process is fully recorded

    Can I replace the telecom optical modem with one I bought myself? I used a second-hand TEWA-750G to complete the entire LOID registration process: where the sticker password is, what error would occur if one of the three authentication elements was missing, WiFi reset after registration, what to do when ITMS comes to reunite late at night, plus honest advice about people not to mess around—copying it saves me a trip to the service center. ...

    2026-9-9
  • It took Synology two years to install Feiniu again. Here are two sets of comparison tables that have been tested for a long time.

    How should you choose between Synology and Feiniu? I've used the DS220+ for two years, and I've run Feiniu fnOS on the N100 mini PC for over half a year, so I've been using both systems for a long time. This article compares six dimensions: price, suite ecosystem, Docker, photo backup, remote access, and data security, clearly explaining who chooses Synology with their eyes closed, who prefers FeiNiu, and also offers a compromise between dual-system parallel systems. ...

    2026-9-9
  • I tried connecting the external network to my home NAS, port forwarding and DMZ.

    port forwarding and DMZ are both ways to expose intranet devices to the external network, but one seems like leaving a door, the other like tearing down an entire wall. I used my hands-on experience connecting to my home NAS and surveillance on an external network to clearly explain the differences, which suits each well, and the unavoidable pitfalls like carrier port blocking and optical modem bridging. ...

    2026-9-9
  • Xiaomi router Mesh roaming does not switch, I figured out the roaming stickiness issue

    What to do if Xiaomi router Mesh roaming won't switch? The phone walked from the living room to the bedroom. The Zi router was right next to it, but the signal was still stuck to the main router, and the video card was stuck like a PowerPoint slide. This is a hands-on record of how I smoothed roaming after setting up two AX3000T mesh sets at home: how to use WiFi Gadget to check RSSI to confirm it doesn't stick, whether to change roaming parameters, whether 802.11r is about to disconnect or is useful, and which three situations are useless—just changing the options....

    2026-9-9
  • I have 6 surveillance heads installed at home. I finally figured out whether they should be wired, wireless or POE.

    want to install several surveillance cameras at home, many people are confused about how to plan the network aspect: wireless or cable, what POE is, and which is the most cost-effective way to store recordings. I spent two years fiddling with six cameras at home, and wrote out the full process from battery models to POE wired cables: how to calculate uplink bandwidth, why distribution networks always fail, and comparing the costs of four storage plans. After reading, I copied it all away. ...

    2026-9-9
  • Cannot access the Internet after resetting the router. Please re-dial the complete sequence.

    if the router suddenly can't access the internet after resetting or restoring from the factory, don't think it's broken. My TP-Link was completely reset by long-pressing the reset button. Here's a complete order to re-dial and connect to the internet after factory reboot: first 192.168.1.1, select the correct internet method, enter broadband account and password for dialing, and then conveniently change WiFi and management passwords back. ...

    2026-9-9
  • Tutorial on changing WiFi password on Mercury router mobile phone, no need to use computer in 5 minutes

    How do you change the WiFi password on a Mercury router on a mobile phone? Two options: log in to 192.168.0.1 via your mobile browser and modify the webpage backend, or install the Mercury Router app and just click a few times. This article is about how I helped my neighbor modify the D268G, including how to fix it when it won't connect to WiFi, which devices need to be reconnected after modification, and how to set passwords that others can't guess—beginners just need to follow the instructions....

    2026-9-9

Contact Us

Online Consultation: Click here to send me a message

WeChat ID: master_135

Scan to follow