192.168.1.1 Why skip the search when you lose? Change these three settings on your mobile phone and computer and enter the background at once

Last month, my friend called and said that the router was broken and asked me to come over immediately. He typed it in the mobile browser 192.168.1.1 , press Enter, the page jumps directly to Baidu search, and the search is still「 192.168.1.1 」These few words. He thought that the backend of the router had been hijacked by the operator, and was ready to poke the reset hole with a toothpick. I said don't poke me yet and show me the dots in the address bar. He sent me a screenshot and I saw something wrong at a glance.: Two of the three decimal points are Chinese periods.

This is not a problem with the router, but with the input method and browser. 192.168.1.1 In this kind of address that is purely numeric and dotted, once any character is made full-width, the browser does not recognize it as a URL and has to throw it into the search. Today's article will write down the order in which I helped him troubleshoot. I talked about both the mobile phone and the computer. Most people got stuck at the second place.

First, distinguish whether you are "searched" or "stopped"”

Many people confuse skipping search with being unable to open, but in fact the performance is far from good. Jump search means: After pressing Enter, there is a search box at the top of the page, which lies as it is. 192.168.1.1 , below are a bunch of search results. The title of the web page often says "Just search on Baidu and you will know" or "Search on Bing". Being stopped means: Already displayed in the address bar 192.168.1.1 , but the page rotates in circles, the screen goes blank, or a message "This website cannot be accessed" pops up.

The root causes of these two diseases are different. Being searched is basically because the browser did not treat your input as a URL. ； If it is blocked, the browser regards it as a URL, but cannot connect to the router. You can take a look at the address bar: if it becomes https://www.baidu.com/s?wd=192.168.1.1 This kind of belt wd= or q= The long link is searched. If the address bar honestly says 192.168.1.1 , but the page cannot come out, it is a problem of not being able to connect, you have to click 192.168.1.1 It can’t be opened and even the login box won’t pop up. Check out the six steps in that article, don’t copy them in this article.

My friend's situation is the first. In his address bar, the search box and the URL box are the same thing. After typing and pressing Enter, the browser will make its own judgment.: This string looks like a URL, just visit it ； Unlike the URL, just search. Once the full-width period appears, the string no longer looks like a URL.

To jump to search on your mobile phone, first switch to the English input method, and then add an http://

The hardest hit area on mobile phones is the Chinese input method. Many people switch to the Chinese keyboard to type numbers and click the "." button, thinking that what comes out is a decimal point. In fact, many input methods give a Chinese period "." 」. 192.168.1.1 It was scored 192. 168. 1. 1. It’s hard to tell from the appearance, and the browser won’t recognize it.

I tried it with my Huawei phone. When typing numbers in the Chinese mode of Baidu input method, the decimal point defaults to a period. ； Switch to the English keyboard to see the real . . The judgment method is also simple. Move the cursor in the address bar to the middle of the two numbers. If the dot occupies a wide space and looks like a period, delete it and type again. The most stable way is to directly copy the following string:

http://192.168.1.1/

add in front http:// , add a slash at the end. Don't underestimate this slash. Some domestic browsers will hesitate when they see a pure number with a dot. If you tell it clearly that it is a URL, it will no longer search there. My friend changed the two periods back and added them manually http:// and the trailing slash, then press Enter, and the login box will appear immediately.

If you still skip the search after typing like this, don’t try it in WeChat’s built-in browser. WeChat's browser handles pure IP addresses very casually. You can click the three dots in the upper right corner, select "Open in browser", switch to the system's built-in browser or Edge or Chrome and try again. For mobile phones with heavy cache, you can also clear the browser cache first. Sometimes old redirects will linger.

Computer Chrome and Edge jump to search, change the address bar and input method

When searching on the computer, the first thing to look up is the input method. When the Chinese input method is on, you type 192.168.1.1 , three dots can easily be transformed into full-width periods by candidate words. Windows press Ctrl+空格 or Ctrl+Shift Switch to English and enter again ； A more trouble-free way is to copy this string of addresses to Notepad, confirm that the dots are all half-width, and then paste them into the address bar.

The Chrome and Edge address bars themselves also "make their own decisions." Click "Settings" in the upper right corner of Edge, search for "Address bar and search", and there is a "Show search and website suggestions in the address bar". It's fine if this switch is turned on, but if your homepage is changed to a navigation station, the search box in the middle of the navigation station is a pitfall.: Many people enter their IP into the search box of the navigation station. Of course, they will only search and not jump to the background. Remember, if you want to lose, use the address bar at the top of the browser, not the search box in the middle of the page.

Domestic products such as 360 Browser and Sogou Browser generally have a "smart address bar" or "website association" setting. When you can't find the specific name, go to the settings and turn off the "Smart Address Bar" and enter it again. http://192.168.1.1/ , most of them are normal. Another situation is that the browser automatically adds https:// , the router does not have a formal certificate, and the page will report "unsafe". At this time, manually change the beginning to http:// That's fine. You can still access the certificate page by clicking "Continue Access", but you just have to click it every time.

Don't be in a hurry to Reset: First confirm whether the gateway is 192.168.1.1

Some people suspect that they have remembered the wrong address while searching. Don't guess yet and let the system tell you. Windows computer button Win+R ,enter cmd Enter and call again ipconfig , look for the "Default Gateway" under the current network card. If that line says 192.168.1.1 , the address is correct ； in the case of 192.168.0.1 , 192.168.31.1 , of course you can't get in if you lose 1.1. If you have changed the LAN port IP yourself, please check first. 192.168.1.1 Will changing the network segment cause the network at home to collapse? That article confirms that the gateway has not been changed. Mobile phones are more intuitive. Go to WiFi details, find the "Gateway" or "Router" column, and copy it accordingly.

There is also a special situation where the IP obtained by the computer is 169.254.xx, which means that you did not get the address from the router at all, and there is a disconnected network between the router and the backend. At this time, don’t say search or not. First, click on the article that cannot be opened and check the network cable, WiFi, and gateway one by one. The gateway step has been confirmed. It’s not over yet. You need to confirm again whether your mobile phone or computer is really connected to your home WiFi. Don’t use the traffic to lose it there. 192.168.1.1 , that string of addresses is just an ordinary intranet address outside, and search engines are more willing to search it for you.

Proxies, VPNs, and private DNS will intercept the login page halfway.

If there was no problem with the above two, I started to check the network enhancement functions on the mobile phone. I have seen a case where a colleague opened the private DNS of an ad filtering app on his mobile phone and entered 192.168.1.1 Instead of skipping the search, it directly prompts that the domain name resolution failed. ； He turned off private DNS and tried again, and the login page came up. On iPhone, search for "Configure DNS" in "Settings → Wireless LAN → Click the i behind the current WiFi". If it says manual or a third-party DNS, change it to automatic first. Android also has similar options in WiFi details.

VPNs and proxies are more discreet. If there is a VPN icon on the top of the phone, or if you have a company VPN, the request may first go to the VPN exit. 192.168.1.1 This intranet address is meaningless there. The browser either times out or is pushed to a search page by the service provider. First disconnect the VPN, turn off the manual HTTP proxy in WiFi, and try again. The same goes for the system proxy on your computer. In Windows, go to "Settings → Network and Internet → Proxy" and manually turn off the proxy if it is on, or click on "Do not use a proxy server for local addresses".

If you turn these off, the page will not jump to the search, but to the operator's advertising page and broadband renewal page. That is another kind of hijacking. It is not the same as the input problem of this article. I have written about it before 192.168.1.1 Login page jumps to operator page , must be dealt with separately.

Steady progress in three steps 192.168.1.1 , we will talk about changing the settings after entering.

I have divided this troubleshooting into three steps. You can do it in order and there is basically no need to reset the router.:

• The first step is to switch to English input method and put 192.168.1.1 Change the three points of to half-width, and then manually fill them in http://192.168.1.1/ .
• The second step is to use the system browser instead of the WeChat built-in page. ； Turn off VPN, proxy, and private DNS, and make sure you are connected to your own WiFi.
• The third step is to use ipconfig Or check the mobile WiFi details to confirm whether the default gateway is exactly the same as the address you entered.

After completing these three steps, the login box will appear. All that is left is the account and password. You can see how to log in with your mobile phone. 192.168.1.1 How to log in to the router backend using a mobile phone . After you actually get in, let’s talk about changing the WiFi name, changing the password, and binding a static IP. These are separate operations. Don’t confuse the problem when you can’t get in. My friend's TP-Link was not reset at the end. He just changed the two Chinese periods back to decimal points and made up for it. http:// and a trailing slash to enter the background in ten seconds. He said he would have known better and would not have called me. I said that if you had not called me, I would have restored the router to the factory tonight.