-
The Mercury Tenda router's network port light can see Gigabit and 100Mbps, and it flashes wildly in the middle of the night and can catch thieves.
The row of small lights next to the Mercury Tengda router's network port each has its own role: always on for power, flash for data flowing, and models with dual-color rate lights have green gigabit and orange hundredm. I tested it with the D191G and AC10, and even used that flashing light at night to catch a desktop computer stealing data. This article covers all four states and troubleshooting for the lights not working. ...
-
Telecom uses 300M to 300M gigabit speed, testing 330Mbps, and it's not just optical modems that lag in network speed
Telecom broadband has been upgraded from 300M to Gigabit. Will the speed test be still 330M when the package takes effect on the same day? 80% of the time it's not the operator who's tricking you, but the fact that there's a port on the chain at home that only connects to 100M or 1Gb. When I upgraded my house to gigabit, I had to buy three things to get the full capacity.: Optical modem network port, router WAN port, network cable, this article writes down in order the list and pitfalls that need to be checked before and after upgrading to gigabit. ...
-
When the cache disappears from NAS SSDs every few days, the root cause is usually not with the drive
The SSD in the NAS disappears from the hard drive list every few days and comes back after restarting? My 256G small disk that was used as a cache was lost for a month, and I found the current status after checking dmesg. Disk drop ≠ disk failure. The power saving mechanism, SATA port, and main control firmware are arranged in order. Most of them can be cured without spending a penny. ...
-
WiFi signals are full-bar, but the speed is slow; a three-bar desktop is ten times faster than a one-slot phone
The WiFi is full but the speed is very slow. Most of the time it is not the router that is broken. The number of grids only cares about "whether it is connected or not", not "how fast it is connected". This article talks about how I used dBm and speed measurements to measure six points in my home, and found out three real culprits that slowed down the speed.: 2.4G was full, the channel was changed late at night, and old neighbor routers were crowded on the same channel, and none of them cost a penny. ...
-
Don't blame broadband for WiFi intermittent connections; checking logs reveals that the connection layer is reconnecting
WiFi is intermittent, and the web page is stuck for two seconds and then clears up on its own? Broadband and routers are mostly wrong. There is also a layer of connection called "association" between the mobile phone and WiFi. If it is disconnected, it will reconnect itself, so fast that you will only feel stuck. This article talks about how I dug out the flash outage evidence from the router logs. The five real culprits are ranked by probability. Most of them can be cured without spending a penny. ...
-
If your phone can't access 192.168.1.1, it's most likely because you're connected to the wrong WiFi
The mobile phone is clearly connected to WiFi and can access the Internet. The browser clicks 192.168.1.1 But it prompts that it is not on the same network or simply goes around in circles. The first reaction is probably that the router is broken. I checked for my neighbor, and the truth was that he was connected to optical modem's WiFi, and the management page was on another machine. This article explains five signs of incorrect WiFi connection and a two-minute troubleshooting path. ...
-
The Xiaomi router's WiFi speed is normal, but ninety percent misread that number
What is the normal WiFi speed of Xiaomi router? How many MB should a mobile phone connect to 5G? I compared the negotiated speeds and measured speeds of 6 devices at home for three months. This article explains 192.168.31.1 How to read the row of numbers there, why 2.4G only has 72 MB, and why AX3000T’s 2882 MB can never be seen on mobile phones. Let’s explain it clearly at once. ...
-
Router WiFi was scammed by printers using Chinese names; only after testing five types of devices did the rules be set
Can the router WiFi name be in Chinese? In my actual test, I changed the WiFi at home to "Don't use it next door." The printer fell out on the spot, the TV box displayed garbled characters, and the sweeper couldn't connect to the Internet. This article tries the five types of names including Chinese SSID, space, pound sign, and emoji for each device. A table explains which names can be used and which ones are pitfalls. ...
-
The optical modem only has network port 1 to access the internet; the VLAN ties the port tightly, unlocking three routes
The four ports on the back of the optical modem are exactly the same. If you plug in network port 1, you can access the Internet. If you switch to network port 2, there will be no network. Computers and mobile phones are the same. It's not that my mouth is burning, it's that the operator has used VLAN to tie the Internet channel to network port 1. This article explains the principles clearly, and then gives you three ways to change the binding, add a switch, and change the interface. You can directly check which one is suitable for you. ...
-
When switching to a Mercury Tengda router, don't reconfigure everything one by one; import configuration files and everything returns in 5 minutes
Mercury Tenda replaces a new router. Do not reset the broadband account, WiFi name and password, and speed limit blacklist one by one. Export a configuration file from the old machine and import it back into the new machine. It will be back in 5 minutes. I am writing this article to send Xiaomo AC10 configuration to the car.: The firmware version of the new machine does not match and the bomb verification fails. The old LAN port IP is still hidden in the configuration, causing the background address to change after importing. Please tell me how to choose between the two paths. ...

