-
RAID1, RAID5, and RAID6 have all been used, and NAS is selected based on the number of disks.
NAS the first thing to do after installation is to choose RAID mode. What exactly is the difference between RAID1, RAID5, RAID6, or BASIC without RAID6? I use the real data of three arrays I've built: how to calculate available capacity, what happens if a disk breaks, how long it takes to rebuild, and what RAID can't save—a table to help you identify the situation. ...
-
There is a difference between 256MB and 512MB of router memory, measured on three machines at home
How much memory is enough for routers? When there are many devices at home, it gets lagging—is the memory running low? I dug out three routers at home with different memory and tested them: a 128MB old old router, a 256MB AX3000T, and a 1GB soft router. I'll tell you which situations really consume memory and which don't matter. ...
-
Xiaomi AX3000T and Huawei AX3 mixed mesh test for three days
Can Xiaomi routers match Huawei's ZTE router group Mesh? I tested it for three days using a Xiaomi AX3000T paired with a Huawei AX3. The official app route didn't work, so I switched to wired AP mode to combine the two devices. I'll explain exactly when it's worth mixing and when to buy from the same brand. ...
-
Two broadbands were superimposed, and dual WAN, single line multi-dial, and link aggregation were all tried, and the final solution was the most primitive.
have two broadband lines at home and want to stack the speed? I spent half a year working on China Telecom's 500Mbps and China Mobile's 300Mbps, going through four main roads: multi-WAN load balancing, single-line multi-dial, optical modem bridging, and link aggregation. Which one really boosts speed, which is psychological comfort, why can't single-threaded downloads go anywhere, and why does a computer use two cables at the same time? This article covers the whole truth. ...
-
192.168.1.1 and 192.168.0.1 I finally figured out the difference by helping a friend install it.
192.168.1.1 and 192.168.0.1 are both router backend addresses. The difference lies in the default brand habits: TP-Link and optical modem use more 1.1, while older models like Mercury and Tenda use 0.1. This article clearly explains how to quickly determine which one your home is, what happens if you input the wrong data, how to distinguish when both the optical modem and router use 1.1, and includes a brand comparison table and three reasons for changing the default subnet. ...
-
The Mercury router LAN port IP and the optical modem network segment are fighting. 192.168.0.1 It stopped after changing to 2.1
How to change the IP of the Mercury router's LAN port? The optical modem is also 192.168.1.1, but the two segments collide and the connection drops daily. I went to the Mercury backend and changed the LAN port to 192.168.2.1 to avoid it. This article clearly explains what needs to be changed, what the router address changes after change, whether to change DHCP, and how to save yourself if you can't connect after modification. Mercury D191G hands-on test....
-
After the telecom optical modem was changed to a bridge, there was no IPTV signal. I tried all three channels that night.
What should I do if the IPTV screen goes black and there is no signal after switching to a telecom optical modem bridge? After modifying the bridge TV, the screen went black. That night, I tried three methods: Xiaoyi Manager check, super password entering the background to find WAN connection, and finally using multicast VLAN to restore IPTV. The whole process was recorded. ...
-
Feiniu NAS is powered on 24 hours a day and has been running for a year. The actual electricity bill is different from what you think.
many people want to buy a NAS but worry about wasting electricity when running 24/7, I put my N100 Feiniu NAS on the meter at home and tested it for a whole year: how many watts it has in standby, whether it saves on hard drive sleep, how much does it compare to Synology's four-drive drive, and how much does it cost in a year? This article will show you the math. ...
-
PS5 always fails to connect and Switch cannot find rooms. Once you understand NAT1/2/3, it will be smooth.
What are the NAT types? PS5 online failure prompt Strictly NAT and Switch can't find friends' rooms, most likely NAT3 causing trouble. I tested it using Xiaomi AX3000T and Telecom optical modem. After UPnP, port forwarding, and optical modem bridging, I changed NAT3 to NAT2, and all online connections worked. ...
-
Don’t throw away the old Xiaomi AX3000T. Change the wireless relay to supplement the kitchen signal. The management IP will become 31.39.
How do you set up wireless relay on a Xiaomi router? I changed the replaced AX3000T to relay mode to supplement kitchen signals. The 192.168.31.1 backend work mode switch full process, after relay, the management IP becomes the 31.39 pitfall. I'll explain when relay is sufficient and when Mesh should be added....

