Home • All articles by author SHUNOT - Page 11

  • After switching NAS to Docker Compose, containers never got messy again

    What is Docker Compose on NAS used for? After I changed from parameter to parameter point in the Feiniu interface to using Compose to manage them all, the configuration, update, and relocation of the nine containers became worry-free. This article describes the difference between Compose and manual installation, how to write yml to prevent overturning, how to save the order of containers after restarting, and how to move all the containers in one night when changing NAS. ...

    2026-11-2
  • After buying Mesh, I realized I didn't have a pre-installed cable, so the wireless backtrip was half as slow

    I excitedly bought two Mesh units. Halfway through the installation, I remembered that there were no network cables embedded in the wall and could only be used for wireless backhaul. The speed test in the bedroom was half as slow. This article records the four remedial routes I have tried.: The costs and effects of moving the main router, using open wires, single-line multiplexing, and power cat bridging are clearly listed. If you haven't done it yet, read it before spending any money. ...

    2026-11-2
  • 192.168.1.1 How to fix a whole disconnection after changing the WiFi password

    exist 192.168.1.1 After changing the WiFi password, the mobile phone and TV were reconnected, but the camera and sweeper were collectively offline. This article records the different rescue methods after the four types of devices lose contact.: Which ones do not need to be reconfigured at all, which ones need to be reconfigured, in what order, and the trouble you can save by spending two minutes before changing the password. I tried them all at home. ...

    2026-11-2
  • Xiaomi routers only have 100 Mbps, and the gigabit port is compressed to 100 Mbps, first check the connector

    When the Xiaomi router was plugged in and the network cable was plugged in, the speed was only 100 Mbit/s, and the Gigabit broadband was not fully utilized. It was probably not that the router was broken, but that the network port negotiation was suppressed to 100 Mbit/s. I'll write this down 192.168.31.1 How to check the negotiated speed on both sides of the computer network card, the three real culprits of four-core network cables and old network cards, and how to check back to Gigabit after changing the cable head. ...

    2026-11-2
  • My child secretly played on his phone late at night, so I set the router's backend to automatically disconnect when needed

    How to set a scheduled disconnection on the router? If a child secretly plays with his mobile phone in the middle of the night and refuses to listen, instead of confiscating the mobile phone, it is better to turn off the WiFi at certain times. This article explains where the WiFi timer switch is in the backend of the router, what the names are for each brand, and what I learned from taking all the cameras at home offline the first night. I followed the settings and everything was stable. ...

    2026-11-2
  • Mercury Tengda router has been cloned of MAC address, and the new machine can't get broadband dialing

    I changed to a new Mercury or Tenda router, but my broadband account and password are correct, but I can't dial a number, and it reports 691. Most likely, the operator has memorized the MAC of your old router. exist 192.168.0.1 There is a MAC address clone in the advanced parameters of the Internet settings. Click Use the MAC of the current management PC to save it. This article describes the entrance locations of the Mercury and Tenda sets of backstages, as well as the lesson I learned from helping my neighbor install the equipment but not cloning it. ...

    2026-11-2
  • To determine whether the optical modem is bridging or routing mode, don't rush to change—first look at these three aspects

    Whether the optical modem is in bridge or routing mode directly determines whether the router fills in PPPoE or dynamic IP. When I added a router to my cousin's house, I first looked at the router's WAN port IP, then entered the optical modem WAN connection table to identify the Route and Bridge. Finally, I plugged in the network cable and tried it once, and the decision was finalized with three tricks. This article makes it clear 192.168.1.1 and 192.168.2.1 There are two sets of backstage entrances, with the exception of the half-bridge. ...

    2026-11-2
  • The telecom optical modem firewall switch, port mapping UPnP DMZ is all for free

    Port mapping, UPnP, and DMZ are all in place, but the external network still cannot connect to the NAS and camera at home. The problem is probably hidden in the optical modem firewall layer. This article explains the two paths of Huawei HS8145V5 and ZTE F7015T, how to choose the firewall level, and why you need to go back to the router for retesting after making the changes. ...

    2026-11-2
  • If you can't run a gigabit battery, don't blame the router—cut the Category 5 and Category 6 cables to see clearly

    What is the difference between Category 5e and Category 6 network cables? The Gigabit broadband speed test at home is always lagging behind. Don’t blame the router first, it’s probably the cable in the wall that’s holding you back. In this article, I cut open the Category 5e, Category 6, and Category 6e cables to compare them, and explain clearly the wire diameter, frequency, cross frame, and copper-clad aluminum pitfalls. It is easy to understand at a glance which categories of Gigabit cables to choose. ...

    2026-11-2
  • With CloudRestore installed on Feiniu NAS, you no longer need to send large files via WeChat

    How to install Cloudreve on Feiniu NAS and create a personal network disk? I used Docker to install Cloudreve into N100 Feiniu, and took note of the port mapping, directory mounting, how to get the initial password, how to open the external network, and why I didn’t use WeChat to upload dozens of gigabytes. Just follow the steps and you will be able to directly transfer files through your mobile phone and computer browser. ...

    2026-11-1

Contact Us

Online Consultation: Click here to send me a message

WeChat ID: master_135

Scan to follow