-
Troubleshooting: Mijia automation fails to execute when the point is reached, the door lock is turned on and the light does not light up: I checked these five switches one by one before they worked.
Mijia automation is too far gone to implement, so it is most uneconomical to delete the scene and redo it first. This article describes the process of checking door locks, light bulbs and Aqara gateways one by one.: Effective time, location permissions, device fake online, execution sequence, family grouping, there is always one of the five switches that is not turned off tightly. ...
-
Xiaomi router UPnP settings location: PS5 online NAT3 keeps failing, I put 192.168.31.1 I turned to the bottom to find it
Xiaomi router UPnP switch hidden in 192.168.31.1 In the advanced settings, the Mijia App is basically unavailable. This article records my troubleshooting process for turning on UPnP for AX3000T, PS5 or NAT3.: Where is the menu, why does it not take effect when enabled, how to confirm from the mapping list, and finally how to divide the work between UPnP and port forwarding DMZ. ...
-
Router Internet access method selection: There are three types: PPPoE, dynamic IP, and static IP. If you choose the wrong one, you will not be able to access the Internet.
The first thing you do when entering the background of a new router is to select the Internet access method. PPPoE, dynamic IP, and static IP all look similar. If you select the wrong one, you will not be able to dial the number. In this article, I helped my cousin install routing and mistook dynamic IP for PPPoE, and taught me two lessons about missing the subnet mask for the company's dedicated line. Three ways to get it right. ...
-
After switching to the optical modem bridge, ChinaNet is fully charged but still can't access the internet—it's not broken
After I changed the Huawei HS8145V5 at home to a bridge connection, the ChinaNet on the optical modem was still full, but the mobile phone could not connect to the Internet. This is not broken, but the bridge only hands the dialing to the router, and the optical modem WiFi no longer does NAT forwarding. This article explains the judgment method, WiFi path and three exceptions. ...
-
The telecom optical modem restarts at a scheduled time, and it took 192.168.2.1 to find it after scanning three times
After using the optical modem for a long time, it either disconnects from the network or the PON light jumps randomly. After my Huawei HS8145V5 automatically restarts at 4 a.m. every Wednesday, I have never been blinded during the morning rush hour. This article makes it clear 192.168.2.1 The timed restart entrance in the background, the difference between time and WiFi timer switches, and three pitfalls that are easy to overturn. ...
-
Mercury Tengda router 5G is missing, but 2.4G is still connected—five steps to save it
The 2.4G of my Mercury D191G at home is still connected, but my phone suddenly cannot find the 5G WiFi. I followed the five steps of dual-band integration, 5G switch, channel, compatibility with old equipment, and wall penetration distance, and finally changed the 5G channel from automatic to 149 before returning. This article explains clearly the backstage paths of Mercury and Tenda. ...
-
The NAS printer can't find it under the secondary router, so adding a static router will work
I have two routers at home, the main router 192.168.1.1 , sub-router 192.168.2.1 . The main network computer can access the Internet, but the NAS and printer under the secondary router cannot be found. I added a static route in the main router background, filled in the target network segment, subnet mask, and next hop correctly, and it was connected in three minutes. This article explains the parameters and three pitfalls clearly at once. ...
-
N100 and J4125 have been used for half a year; when choosing a NAS, don't just look at benchmark scores when choosing a CPU
I have two NAS at home, one N100 and one J4125. I have been using each for half a year. Don’t just look at the number of cores and threads for a CPU. Transcoding, running Docker, and standby power consumption determine whether it’s worth the extra money. In this article, I spread out the measured numbers of my two machines for you to copy. ...
-
For smart socket power statistics, I used the power meter correctly for a year, and all errors were in low-power standby
The daily electricity consumption in the smart socket app should not be used directly as an electricity bill. The error for high-power appliances is small, but the error for low-power standby devices such as routers, optical modems, and TV boxes can be several times higher. In this article, I used a power meter to check the results for a year, explaining which numbers to believe and how to read the trends. Don’t mistake the falsely high standby wattage for using too much electricity. ...
-
192.168.1.1 Searches as soon as you enter it. Change these three settings on your phone and computer to go to the background at once
Browser address bar 192.168.1.1 , press Enter but jump to the search page, don’t be in a hurry to reset the router. Most of them are because the decimal point is replaced by a Chinese period, the browser uses the address bar as a search box, and the mobile phone is connected to a VPN. This article clearly describes the steps I took to help my friend troubleshoot. Type an extra http:// and a slash on the phone, and change the address bar settings on the computer to enter the background stably. ...

