-
A new NAS hard drive was fully tested and zeroes were written after 18 hours. Please don’t learn from me among the three types of people.
Should you perform a full system inspection before installing a new NAS hard drive? My 4T Cool Wolf chip showed Current_Pending up on the third day, and the second drive honestly ran for 18 hours, with bad blocks writing zero. Short can't find edge sectors in two minutes, long in six hours can only read but not write. This article discusses how the severity of these three tests differs and who must do them....
-
The mobile phone speed is stuck at 867Mbps. Let’s settle the account of 2x2 and 4x4 spatial streams.
What do 2x2 and 4x4 routers mean? It's not the number of antenna roots, but the number of spatial streams. Phones are almost always 2x2, and a 4x4 router is useless against a single phone. This article explains how to calculate negotiation speeds for 867, 1201, and 2402, and includes a command to check your device's current status....
-
The day the broadband installer asked for the password, I dug out the guest network switch on the Xiaomi router.
There are two ways to open guest networks on a Xiaomi router: just tap in the Mi Home App toolbox, and 192.168.31.1 also has a hidden switch in the background. Guests can even access the visitor's WiFi but cannot access the internal network. I tested the isolation boundary with a backup device—NAS, printer, and shared hard drive all couldn't touch it. I also explained all three pitfalls....
-
Don't just look at the full grid of your mobile phone for Mesh sub-routing, measure 8 points before deciding on the location.
Leaving a Mesh sub-router at random is basically a wasted purchase; the mobile signal bars can be deceived. I used Mijia WiFi Gadget Box to test 8 points throughout the house, teaching you how to test both the phone and return lines, with the sub-router placed at the main router's attenuation point between -65 and -70....
-
192.168.1.1 Looking through the running logs, I caught the real culprit of scheduled network disconnection in the early morning.
The router shuts down at a scheduled time in the middle of the night, and restarting is enough—can't be found on site? The runlog in the 192.168.1.1 backend is the black box. This article explains clearly where the logs are and how to read the four key records. I used it to track the entire process of six consecutive dialing failures at 3:47 a.m....
-
Mercury router firmware upgrades are all manual. Download from the official website and check the hardware version first.
All Mercury routers do not support automatic upgrades; firmware updates must be manually downloaded from the official website. Step-by-step guide to copying model and hardware versions, searching for firmware on the official website, extracting and uploading in six steps, plus life-saving details like power outages and after-sales hotlines....
-
Telecom optical modem LAN port IP moved to the network segment, 192.168.2.1 No more hitting VPN
During remote work, the company VPN completely disconnected from home during a single visit. After checking all night, I found out the company network range clashed with the optical modem's 192.168.2.1. I used telecomadmin super admin backend to move the optical modem's LAN IP to 192.168.5.1, and recorded all five steps, the four aftermath changes, and the ITMS rollback defenses....
-
Feiniu Photo Album face recognition test: N100 can handle 40,000 photos
Where to activate Feiniu album facial recognition, how long does it take to take 40,000 photos? Can the N100 mini PC handle it? How to manually merge kids' faces when they always seem to be fools? I tested it on my N100 Feiniu, and the results and pitfalls are all recorded here. If you haven't backed up your photos to your NAS, check out the pre-installation section of this post first....
-
My oldest router has lasted for 8 years. If two of the five aging signals appear, don’t repair it.
How many years does a router typically last? There is no official retirement period; the retirement age for my three machines is 8 or 5 years, and they are still in service. Capacitor aging, firmware downtime, and WiFi standard iteration are the three major killers. If two of these five signal signals appear—restarts are getting more frequent and 5G is getting weaker—don't spend 50 yuan fixing them—old machines can still be replaced with APs for reuse....
-
When the Xiaomi router is connected to the printer, the USB port does not respond. There are only three ways to connect it to the printer.
It's normal for the printer to be unresponsive when plugged into the USB port of the Xiaomi router; the official firmware doesn't even include this function for printing servers. The printer comes with WiFi and connects directly to the router. Old USB printers either use a computer as the host for sharing or spend about a hundred yuan on a print server box. I've tried all three options and just follow the appropriate path....

