-
The network port of the router is not enough to add a home switch. The first time I connect the TV, it becomes a slideshow.
During renovation, every room was left with network cables, but the router only had four LAN ports, so the NAS, TV, and camera couldn't get a spot. I bought an 8-port gigabit switch for just a few dozen yuan, but the first time I connected it, I fell into the trap of a 100-megabit port—the TV was stuck in 4K and turned into slideshows. How to choose a switch, how to connect it—all three pitfalls are here....
-
Don’t turn off WMM on the router, the whole house WiFi will drop from 300Mbit to 54Mbit.
What exactly is the WMM switch in the router's backend? I turned it off once in my AX3000T, and the whole house's WiFi dropped directly from 300Mbps to 54Mbps. This article explains the queuing principle of WMM, why it can't be turned off, and why the rumors that turning WMM off to fix game lag are just an illusion....
-
The Mercury router wireless bridge is set up like this, and the old machine is used as a secondary router to compensate for the room signal.
Don't throw away the old Mercury router at home—switch to wireless bridging as a secondary router, add a six-step guide for hallway slotting, and upgrade the study signal from two bars to full. It's normal to be unable to access after bridging 192.168.0.1, but the change in management IP made me panic for the first time too....
-
Tianyi gateway port mapping is not in useradmin, so you need to go through two levels of backend.
If you can't connect to your home NAS from the external network, it's usually because the optical modem router mode is blocking the way. The useradmin backend doesn't have a port mapping entry at all; you have to obtain the telecomadmin super admin password to enter the second layer. I noted down the four steps to setting up Huawei HS8145V5 and the three pitfalls that still can't be connected....
-
China Telecom Broadband uses three steps to find out the public IP address. Call 10,000 to get it back.
Can't connect to your home NAS no matter what? Don't blame the router for now—maybe your broadband doesn't even have a public IP address. I've reviewed the three-step self-check method, CGNAT determination, the scripts for asking for a public IP when entering 10,000 accounts, and how to disassemble the dual-layer NAT of the optical modem. This article explains everything in order....
-
Accidental deletion of Synology Drive synchronization disk will cause infection, synchronization is not backup
I've used the Synology Drive sync drive for over two years, and only after emptying the recycle bin did I realize the one in the NAS was gone—syncing and backup are two completely different things. This article explains how to choose between two-way and upload-only, and download-only modes, how to recover accidental deletions using version control and the Recycle Bin, and why never select the entire user drive for directory synchronization....
-
WiFi packet loss rate is high, use three pings to find out the real culprit of game lag
What should you do if WiFi has a high packet loss rate? Teleportation in games and intermittent voice chats, but speed tests are normal—most likely due to packet loss. Using the three-band ping method to distinguish whether the issue is a WiFi band, router, or broadband outlet, with packet loss rate criteria and a fixing comparison table....
-
Separate 2.4G and 5G on Xiaomi router, turn off dual-band and combine it in three steps
Xiaomi router 2.4G and 5G separate setup tutorial: Go to 192.168.31.1's WiFi settings and turn off dual-band integration. Splitting one WiFi name into two makes smart device network setup easier. After dismantling my home, I connected the vacuum cleaner all at once, and I also wrote down the cleanup order for reconnecting the whole house....
-
I have paid for all three broadband providers: China Telecom, China Mobile and China Unicom. Here is the actual measured data during the evening peak hours.
Is free mobile broadband really reliable? Why is Telecom over 1,000 yuan a year expensive? I've used all three broadbands: China Telecom for 169 yuan, China Mobile Package for 129 yuan, and China Unicom for 129 yuan. The difference during evening peak hours isn't download speed, but latency. Which people choose mobile phones is worth it, and who must get telecom service? One meter matches your seat, and I've already thought of three old methods for you before installation....
-
I have been using WPS one-click connection on my router for three years, but it turned off the same day after I understood the PIN code.
The WPS button on the router connects to WiFi with one touch without entering a password. The 8-digit PIN code is split into two halves for verification, and it can be generated after up to 11,000 attempts. No matter how strong the password, the router will hand it over automatically. This article explains the principles, the shutdown paths of each brand, and which devices turn against each other after turning them off....

