-
There are five brands and five names for routers to be restarted regularly, and Mercury is hidden in automatic cleaning.
If the router lags and disconnects after prolonged use, setting a scheduled restart can extend its life. But the five brands have different names for this feature: Mercury is called Auto Cleanup, while Asus is hidden in the mobile app. I have written down the backend paths, restart timing, and side effects of each brand all at once....
-
Mercury IPv6 Go melogin.cn Open, it’s really convenient to connect to NAS
Complete process for enabling IPv6 on a Mercury router: Go melogin.cn the backend, go to the network parameters, select IPv6 switch, set the internet access mode to automatic, save and reboot, and verify with test-ipv6.com. The biggest change after enabling remote connection to NAS is that you no longer need to use internal network travers. I've also encountered the same issues with optical modem router mode and firewall....
-
China Telecom’s Gigabit Broadband only runs 93 Mbit/s, which is probably because the optical modem is plugged into the wrong 100 Mbit/s port.
Gigabit broadband speed test is only 93 Mbps? Don't rush to criticize the carrier; most likely the network cable is plugged into the 100Mbps port of the optical modem. Check the screen print, check the backend for negotiated speed, check the computer connection speed—three ways to identify ports, include a four-core network cable slot and a free gigabit modem replacement....
-
The ransomware targeted 3,600 QNAP units, and I opened three gates for the NAS
NAS really can be targeted by ransomware—DeadBolt encrypted 3,600 QNAP devices overnight. Explain clearly how viruses get in and why RAID can't be saved, then hand over the three gates I use at home—snapshots, one-way backup, and offline drives—as they are....
-
Actual measurement of router wall penetration mode: The transmitting power ceiling is welded shut at the factory.
Can't find the power settings in the router backend? I tested all three levels of Xiaomi signal strength, ASUS modified the region, and OpenWrt power slider. In actual tests, wall penetration mode only increased by 3dB, and I realized the national standard has soldered the transmission power cap. If the signal is poor, the real issues to adjust are the location and channel....
-
Xiaomi router is checked on the website, Mijia App new device notification reveals unfamiliar mobile phone
It's not hard to check for WiFi on a Xiaomi router. The 192.168.31.1 homepage has a device list, and the Mi Home app also provides new device access reminders. Three tricks to recognize unfamiliar devices, the difference between banning internet access and blacklisting, and the pitfalls of random MACs accidentally hit by whitelist—I tested them AX3000T and just clicked them accordingly....
-
Five network cables are pre-buried in a self-built house in rural areas, and WiFi is fully available on three floors
When building rural self-built houses, embedding network cables together saves ten times the effort compared to remedial them after moving in. Five points on a three-story building, actual measurement of cast-in-place floor slab attenuation, fiber optic access to homes, and how to maintain yard surveillance—I'll go through them in the order I built my own house....
-
192.168.1.1 Back up the configuration, save a copy before reset
The router's configuration file stores all settings such as broadband account password, WiFi password, and port forwarding. Before resetting, spend two minutes exporting a bin file from the 192.168.1.1 backend. After factory restore, restore it with one click, no need to search the service center for a broadband account. I've gone through various brand paths, Xiaomi doesn't have alternatives to this feature, and three pitfalls during recovery....
-
mercury router 192.168.0.1 Looking through the device list, I found two mobile phones that used the Internet.
Checking who is connecting to your home WiFi on a Mercury router is not complicated; melogin.cn or 192.168.0.1 goes to the backend, and the online list in device management is clear at a glance. Three tricks to recognize people, the difference between banning and blocking, and the pitfalls of random MAC swapping identities—I tested them all with my D191G at home and just followed them....
-
My mobile phone is always stuck with ChinaNet. After turning off the WiFi of Telecom Optical Mode, the Internet speed increased ten times.
After installing my own router, the ChinaNet WiFi that comes with the optical modem is still on, but my phone is always stuck to a single bar. The speed fluctuates between fast and slow, plus there's an extra door for people to get caught off guard. I used useradmin to log into the 192.168.2.1 backend and turned off the optical modem WiFi. I recorded the two entry points for the webpage and Xiaoyi Manager, the one thing you had to do before closing, and the ITMS push back defense—all in one go....

